★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions

Free Instant Download NEW 300-360 Exam Dumps (PDF & VCE):
Available on: https://www.certleader.com/300-360-dumps.html


The sample test papers are made with the combination in the technical questions and logical, verified explanations. Absolutely no other site can supply you this kind of wonderful experience. Master every one of the necessary contents to the Cisco 300-360 actual test is the easy work after receiving help from Ucertify. Our qualified IT experts have got rich knowledge in compiling the particular Cisco 300-360 exam training materials. They analysis the subject matters through the related companies along with take all of them into the genuine questions. You will find what you would like to make for the Cisco 300-360 exam.

2021 Mar 300-360 brain dumps

Q21. When reviewing a design for a voice over wireless deployment, what per-call bandwidth cost should be factored in when determining maximum calls per cell using SIP and G.711u as the codec?

A. 64 bytes 

B. 8 bytes

C. 80 bytes

D. 10 bytes

Answer: C


Q22. A downstream packet that contains a DSCP value arrives at the WLC Ethernet interface from the wired source network. The WLC is configured for QoS WLAN 802.1p mapping. How does the WLC treat the CAPWAP QoS marking when leaving the controller interface for the respective AP and final wireless client destination?

A. No outer CAPWAP or inner QoS tagging is applied.

B. The outer CAPWAP CoS is marked and capped and the inner DSCP maintains the original marking.

C. No outer CAPWAP QoS tag is applied, but the original DSCP is maintained inside CAPWAP.

D. The outer CAPWAP DHCP is marked and capped without any inner DSCP value.

Answer: B


Q23. An engineer must perform a survey where the target client devices range from standard

Wi-Fi-equipped laptops, consumer handhelds and tablets, and low power tracking tags limited to 12 mW Tx power. With which setting should the survey AP be configured?

A. local power 11

B. local power 5

C. local power 14

D. local power 8

Answer: B


Q24. A customer is deploying a Greenfield 802.11ac network on a floor that will support approximately 300 wireless devices. Which setting needs to be changed on Prime Infrastructure Planning Tool in order to predict the amount of access points the customer needs to service the new floor?

A. Data Coverage Support Margin

B. Demand Settings

C. Add AP Field

D. 802.11n Protocol Support

Answer: B

Explanation: Reference: http://www.cisco.com/c/en/us/td/docs/wireless/prime_infrastructure/1-2/configuration/guide/pi_12_cg/maps.html#pgfId-1671104


Q25. The AP has been configured property for a VoWLAN survey The RF environment contains a noise of -87 to -90 dBm. What is the target value for the cell edge reading?

A. -62 dBm

B. -67 dBm

C. -60 dBm

D. -70 dBm

Answer: B


Most up-to-date 300-360 exam engine:

Q26. An engineer is deploying centralized wireless solution with a 5508 controller. What is the most AP licenses that can be supported?

A. 100

B. 250

C. 1000

D. 500

Answer: D

Explanation:

You can order Cisco 5500 Series Controllers with support for 12, 25, 50, 100, 250 or 500 APs as the controller's base capacity. You can add additional AP capacity through capacity adder licenses available at 25, 50, 100 and 250 AP capacities. You can add the capacity adder licenses to any base license in any combination to arrive at the maximum capacity of 500 APs.

Reference: http://www.cisco.com/c/en/us/support/docs/wireless/5500-series-wireless-controllers/112926-5508wlc-license.html


Q27. What is a common cause for signal attenuation?

A. Cinder block wall

B. Office window

C. Metal door

D. Glass wall

Answer: C


Q28. A network engineer is preparing for an office site survey with a height of 2.5 meters. Which three components are recommended to complete the survey? (Choose three.)

A. Use APs with external antennas.

B. Use DoS attack on APs while measuring the throughput.

C. Use APs with built-in antennas.

D. Use a battery pack to power APs.

E. Use a drawing of the office space to draw AP and client placements.

F. Use APs with directional antennas.

Answer: C,D,E


Q29. A Cisco 7925 phone at a client’s location is not registering with CUCM. The engineer analyzes a packet capture, sees that the phone receives an IP, and downloads the proper configuration file from TFTP successfully. What type of messages should the phone be sending at this point?

A. H.245

B. H.323

C. MCGP

D. SCCP

Answer: D


Q30. An engineer installed a 3702 AP and is getting power from the switch. What is the reason for getting 3x3 MIMO instead of 4x4?

A. 802.1p 

B. 802.3af 

C. 802.11e 

D. 802.3at

Answer: B