★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions

Free Instant Download NEW 300-360 Exam Dumps (PDF & VCE):
Available on: https://www.certleader.com/300-360-dumps.html

Dont squander any time to search other Pass4sure. Our own Cisco Cisco exam braindumps are free for you. Cisco certification exam questions and also answers are the majority of reliable, precise and logical training materials, which usually promise you a high score to pass the actual Cisco exam. Take steps right right now, and you will become at your career peak very before long with a Cisco Cisco certification.

2021 Mar 300-360 download

Q11. An engineer receives a digital image scanned from the floor plans of a facility to be surveyed for wireless survey and imported it into Air Magnet Pro. However, the document contains no scale. Which action can the engineer take to most accurately calibrate the size of the floor plan in Air Magnet?

A. Mark the length of a hallway, then count the ceiling tiles, multiply that number by 2 and enter that value.

B. Zoom in and mark across a hallway, then count the floor tiles across that hallway and enter that value.

C. Zoom in and mark a doorway, then size it at 3 feet because most doorways are 36 inches.

D. Mark the entire longest dimension of the floorplan, then use Google Earth to measure the correspondingoutside dimension and enter that value.

Answer: D

Q12. An engineer is performing a predictive wireless design for a Parts Distribution Center, which requires data and location services. Which three requirements are inputs to the design? (Choose three.)

A. access points with directional antennas

B. continuous -67 dBm coverage from one access point

C. overlapping -75 dBm coverage from three access points

D. overlapping -67 dBm coverage from two access points

E. access points in IPS mode

F. continuous -72 dBm coverage from one access point

G. access points in corners and along perimeters

Answer: B,C,G

Explanation: Reference: http://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Mobility/WiFiLBS- DG/wifich5.html

Q13. A customer is deploying a mesh outdoor wireless network based on FCC standards where spectrum analysis shows significant radar energy propagating throughout the coverage area from a local weather station. Which channel must be excluded from the access points RRM calculation to avoid network disruption due to weather radar activity?

A. 132

B. 44

C. 11

D. 36

Answer: A

Explanation:

Weather radars operate within the 5600- to 5650-MHz band, which means that channels 124 and 128 might be affected, but also channels 120 and 132 might suffer from weather radar activity.

Reference: http://www.cisco.com/c/en/us/td/docs/wireless/technology/mesh/7-3/design/guide/Mesh/ Mesh_chapter_0111.html

Q14. Which two steps are associated with the active portion of the audit when a post-installation audit is performed with an auditing tool such as Ekahau? (Choose two.)

A. Check for co-channel interference by standing near an access point on one channel and watching for other access points that are on the same channel.

B. Verify smooth roaming.

C. Check to see if the signal level on other access points that are heard on the same channel is at least 19dBm weaker than the access point that you are next to.

D. Check that all channels are supported by the APs, regardless of client capabilities.

E. Verify that the network traffic of physical data rate and packet loss meets user requirements.

Answer: B,E

Q15. An engineer is planning for a 24 Mbps data rate for a new installation. What is the coverage area from the AP if the environment and other factors are not taken into consideration?

A. 225 feet

B. 80 feet

C. 150 feet

D. 100 feet

Answer: A

Avant-garde 300-360 test questions:

Q16. While performing a Layer 1 passive wireless site survey of a location an engineer detects several instances of low power frequency hopping interference, but cannot physically locate the interfering device or devices. Why is the engineer unable to locate the offending device or devices?

A. The sources are nearby narrow-beam radar and are sweeping through the facility.

B. The sources are PAN and are mobile.

C. The sources are above the ceiling file and transmit intermittently.

D. The sources are actually high-powered devices and transmit from off the site.

Answer: B

Q17. An engineer is assigned to replace an older data-grade autonomous wireless network with a Cisco controllerbased wireless network to meet Voice over WLAN needs. The customer also wants all existing cable infrastructure to be reused and no new cable be specified. How should the engineer respond to the customer’s requirements?

A. Implement the wireless network with the restraints and decrease the TPC neighbor threshold to increase Txpower to provide overlapping cell coverage at sufficient SNR to provide for Voice over WLAN service.

B. Implement the wireless network with the restraints and utilize high-gain antenna to provide overlapping cellcoverage at sufficient SNR to provide for Voice over WLAN service.

C. Inform the customer that the network will not likely function as desired and a post install survey with thepossibility of some new cable would be recommended.

D. Inform the customer that it is not possible to provide coverage and quality for Voice over WLAN usingexisting AP locations and an entire overbuild will be necessary.

Answer: C

Q18. An 802.11n implementation is being discussed. Users are satisfied with the potential 300- 450 Mbps throughput of new 802.11n APs. Which three bandwidth requirements are used to calculate per client bandwidth through an 802.11n AP network? (Choose three.)

A. 450 Mbps throughput is the client max for 5-GHz radio.

B. Channel bonding on 5 GHz is required for a client to have a 300 Mbps WiFi link.

C. 300 Mbps throughput is the client max for 2.4-GHz radio.

D. The remaining bandwidth is divided per device when more clients are connected to one AP.

E. 100 Mbps Ethernet switch port is a potential bottleneck.

F. CleanAir helps clear noise for 802.11n channel bonding to work.

Answer: A,C,D

Q19. An engineer is configuring an autonomous AP for RADIUS authentication. What three pieces of information must be known to configure the AP? (Choose three.)

A. BVI IP address

B. group name

C. RADIUS IP address

D. PAC encryption key

E. username and password

F. shared secret

Answer: A,C,F

Q20. Which two best practices should be considered when a customer wants to purchase and implement Voice over Wireless for Cisco 7925 IP Phones? (Choose two.)

A. Enable lower data rates for 2.4-GHz data WLAN and higher data rates for phones.

B. Use a separate Cisco Wireless Lan Controller.

C. Enable 802.1x and Cisco Centralized Key Management for phone authentication.

D. Use dedicated Access Points only for Voice over Wireless.

E. Set data for 2.4 GHz and voice for 5 GHz using separate SSIDs.

Answer: C,E