Top Tips Of Renovate NSE5_FAZ-6.4 Exam Price

NEW QUESTION 1
An administrator has moved FortiGate A from the root ADOM to ADOM1. However, the administrator is not able to generate reports for FortiGate A in ADOM1.
What should the administrator do to solve this issue?

• A. Use the execute sql-local rebuild-db command to rebuild all ADOM databases.
• B. Use the execute sql-local rebuild-adom ADOM1 command to rebuild the ADOM database.
• C. Use the execute sql-report run ADOM1 command to run a report.
• D. Use the execute sql-local rebuild-adom root command to rebuild the ADOM database.

Answer: B

NEW QUESTION 2
You need to upgrade your FortiAnalyzer firmware.
What happens to the logs being sent to FortiAnalyzer from FortiGate during the time FortiAnalyzer is temporarily unavailable?

• A. FortiAnalyzer uses log fetching to retrieve the logs when back online
• B. FortiGate uses the miglogd process to cache the logs
• C. The logfiled process stores logs in offline mode
• D. Logs are dropped

Answer: B

Explanation:

NEW QUESTION 3
Logs are being deleted from one of the ADOMs earlier than the configured setting for archiving in the data policy.
What is the most likely problem?

• A. CPU resources are too high
• B. Logs in that ADOM are being forwarded, in real-time, to another FortiAnalyzer device
• C. The total disk space is insufficient and you need to add other disk
• D. The ADOM disk quota is set too low, based on log rates

Answer: D

NEW QUESTION 4
Which statements are true regarding securing communications between FortiAnalyzer and FortiGate with IPsec? (Choose two.)

• A. Must configure the FortiAnalyzer end of the tunnel only--the FortiGate end is auto-negotiated.
• B. Must establish an IPsec tunnel ID and pre-shared key.
• C. IPsec cannot be enabled if SSL is enabled as well.
• D. IPsec is only enabled through the CLI on FortiAnalyzer.

Answer: C

NEW QUESTION 5
Which two settings must you configure on FortiAnalyzer to allow non-local administrators to authenticate to FortiAnalyzer with any user account in a single LDAP group? (Choose two.)

• A. A local wildcard administrator account
• B. A remote LDAP server
• C. A trusted host profile that restricts access to the LDAP group
• D. An administrator group

Answer: BD

NEW QUESTION 6
What are the operating modes of FortiAnalyzer? (Choose two)

• A. Standalone
• B. Manager
• C. Analyzer
• D. Collector

Answer: CD

NEW QUESTION 7
What is the purpose of a predefined template on the FortiAnalyzer?

• A. It can be edited and modified as required
• B. It specifies the report layout which contains predefined texts, charts, and macros
• C. It specifies report settings which contains time period, device selection, and schedule
• D. It contains predefined data to generate mock reports

Answer: B

NEW QUESTION 8
On the RAID management page, the disk status is listed as Initializing.
What does the status Initializing indicate about what the FortiAnalyzer is currently doing?

• A. FortiAnalyzer is ensuring that the parity data of a redundant drive is valid
• B. FortiAnalyzer is writing data to a newly added hard drive to restore it to an optimal state
• C. FortiAnalyzer is writing to all of its hard drives to make the array fault tolerant
• D. FortiAnalyzer is functioning normally

Answer: C

NEW QUESTION 9
Which statements are true of Administrative Domains (ADOMs) in FortiAnalyzer? (Choose two.)

• A. ADOMs are enabled by default.
• B. ADOMs constrain other administrator’s access privileges to a subset of devices in the device list.
• C. Once enabled, the Device Manager, FortiView, Event Management, and Reports tab display per ADOM.
• D. All administrators can create ADOMs--not just the admin administrator.

Answer: BC

NEW QUESTION 10
An administrator has configured the following settings: config system fortiview settings set resolve-ip enable end
What is the significance of executing this command?

• A. Use this command only if the source IP addresses are not resolved on FortiGate.
• B. It resolves the source and destination IP addresses to a hostname in FortiView on FortiAnalyzer.
• C. You must configure local DNS servers on FortiGate for this command to resolve IP addresses on Forti Analyzer.
• D. It resolves the destination IP address to a hostname in FortiView on FortiAnalyzer.

Answer: D

NEW QUESTION 11
When you perform a system backup, what does the backup configuration contain? (Choose two.)

• A. Generated reports
• B. Device list
• C. Authorized devices logs
• D. System information

Answer: BD

Explanation:
https://help.fortinet.com/fa/cli-olh/5-6-5/Content/Document/1400_execute/backup.htm

NEW QUESTION 12
Which two statements about log forwarding are true? (Choose two.)

• A. Forwarded logs cannot be filtered to match specific criteria.
• B. Logs are forwarded in real-time only.
• C. The client retains a local copy of the logs after forwarding.
• D. You can use aggregation mode only with another FortiAnalyzer.

Answer: CD

Explanation:
https://docs.fortinet.com/document/fortianalyzer/6.2.5/administration-guide/420493/modes https://docs.fortinet.com/document/fortianalyzer/6.2.5/administration-guide/621804/log-forwarding

NEW QUESTION 13
What remote authentication servers can you configure to validate your FortiAnalyzer administrator logons? (Choose three)

• A. RADIUS
• B. Local
• C. LDAP
• D. PKI
• E. TACACS+

Answer: ACE

NEW QUESTION 14
For proper log correlation between the logging devices and FortiAnalyzer, FortiAnalyzer and all registered devices should:

• A. Use DNS
• B. Use host name resolution
• C. Use real-time forwarding
• D. Use an NTP server

Answer: D

NEW QUESTION 15
What is the recommended method of expanding disk space on a FortiAnalyzer VM?

• A. From the VM host manager, add an additional virtual disk and use the #execute lvm extend <disk number> command to expand the storage
• B. From the VM host manager, expand the size of the existing virtual disk
• C. From the VM host manager, expand the size of the existing virtual disk and use the # execute format disk command to reformat the disk
• D. From the VM host manager, add an additional virtual disk and rebuild your RAID array

Answer: A

Explanation:
https://kb.fortinet.com/kb/documentLink.do?externalID=FD40848

NEW QUESTION 16
Which two statements are true regarding log fetching on FortiAnalyzer? (Choose two.)

• A. A FortiAnalyzer device can perform either the fetch server or client role, and it can perform two roles at the same time with the same FortiAnalyzer devices at the other end.
• B. Log fetching can be done only on two FortiAnalyzer devices that are running the same firmware version.
• C. Log fetching allows the administrator to fetch analytics logs from another FortiAnalyzer for redundancy.
• D. Log fetching allows the administrator to run queries and reports against historical data by retrieving archived logs from one FortiAnalyzer device and sending them to another FortiAnalyzer device.

Answer: AB

NEW QUESTION 17
Consider the CLI command:

What is the purpose of the command?

• A. To add a unique tag to each log to prove that it came from this FortiAnalyzer
• B. To add the MD5 hash value and authentication code
• C. To add a log file checksum
• D. To encrypt log communications

Answer: C

Explanation:
https://docs.fortinet.com/document/fortianalyzer/6.2.5/cli-reference/849211/global

NEW QUESTION 18
Which log type does the FortiAnalyzer indicators of compromise feature use to identify infected hosts?

• A. Antivirus logs
• B. Web filter logs
• C. IPS logs
• D. Application control logs

Answer: B

NEW QUESTION 19
Which two statements are true regarding ADOM modes? (Choose two.)

• A. You can only change ADOM modes through CLI.
• B. In normal mode, the disk quota of the ADOM is fixed and cannot be modified, but in advance mode, the disk quota of the ADOM is flexible because new devices are added to the ADOM.
• C. In an advanced mode ADO
• D. you can assign FortiGate VDOMs from a single FortiGate device to multiple FortiAnalyzer ADOMs.
• E. Normal mode is the default ADOM mode.

Answer: CD

NEW QUESTION 20
......