Latest NS0-520 Braindumps For NetApp Certified Implementation Engineer - SAN. ONTAP Certification

NEW QUESTION 1

A customer that is using an AFF A220 has a problem with a host for a new FC LUN. Other LUNs on the same SVM are working properly. This LUN is not visible on the host. Which configuration does the customer need to verify in their solution?

• A. LUN mapping with igroup
• B. host HBA speed settings
• C. FC target port setting on NetApp node
• D. FC switch zoning

Answer: C

NEW QUESTION 2

Click the Exhibit button.

During pre-deployment testing, you want to ensure that all FC paths are available to your host. You use the network interface modify -vserver SVM1 -lif LIF_top-0f -admin-state up command to correct the configuration shown in the exhibit.
What happens when using this command?

• A. It creates a new LIF on SVM2 named up.
• B. It creates a new LIF on SVM1 named LIF_top-0f.
• C. It changes the administrative state from “down” to “up”.
• D. It changes the operational state from “down” to “up”.

Answer: C

NEW QUESTION 3

Which data collection tool would be used for obtaining detailed information about hosts that are attached to ONTAP storage?

• A. Upgrade Advisor
• B. OneCollect
• C. Brocade Network Advisor
• D. Conflg Advisor

Answer: B

NEW QUESTION 4


Referring to the exhibit, which two elements are required for NVMe host access with ONTAP 9.5 and using supported AFF nodes? (Choose two.)

• A. You need 16 Gb FC HBAs installed in the AFF nodes.
• B. You must have the license installed for NVMe support in the cluster.
• C. You must have the license installed for FC support in the cluster.
• D. You need 32 Gb FC HBAs installed in the AFF nodes.

Answer: CD

NEW QUESTION 5

A customer is expanding an ONTAP 9.4 switchless 2-node FAS2750 cluster. Two AFF A220 nodes will be added to the cluster.
In addition to the cluster nodes, what else is required to perform the cluster expansion?

• A. Additional management switches are required.
• B. An upgrade to ONTAP 9.5 is required.
• C. Cluster switches are required.
• D. Additional DS224C shelves are needed.

Answer: A

NEW QUESTION 6

An administrator wants to implement FCoE for connectivity of an AFF A200 using VLAN 3011 for fabric traffic across VSAN 11. When configuring the Nexus switches for FCoE connectivity, which two actions are required? (Choose two.)

• A. Create a new virtual FC interface and bind the physical interface to it.
• B. Add the virtual interface to the VSAN.
• C. Create a port channel and add all of the physical network ports that will have FCoE LIFs.
• D. Add the adapter MAC address to the network port configuration where the node is connected.

Answer: BC

NEW QUESTION 7

Exhibit.

A customer is testing a dual-fabric FC SAN configuration as shown in the exhibit. The zones are implemented on the switches shown below.

IF all the nodes are in the SLM reporting nodes list, how many paths per LUN should the customer expect when simulating a node failure by powering off Node 04?

• A. 4 paths
• B. 6 paths
• C. 8 paths
• D. 2 paths

Answer: B

NEW QUESTION 8

A customer wants to move its iSCSI SAN data from the edge locations into the cloud for data analytics, while keeping the ability to access modify the data.
Which two combined solutions meet the customer's requirements in this scenario? (Choose two.)

• A. Use Microsoft Azure compute resources to access the near cloud AFF SnapMirror data for analytics.
• B. Deploy ONTAP Cloud at edge locations find use SnapVault to move the data into an AFF on-premises data center.
• C. Deploy ONTAP Select at edge locations and use SnapMirror to move the data to AFF near cloud with the NetApp Private Storage (NPS) service.
• D. Use Amazon Web Services (AWS) compute resources to access ONTAP Select data at the edge office locations for analytics.

Answer: AD

NEW QUESTION 9

Which type of multipathing does Linux support?

• A. dm_mp
• B. dsm
• C. mpio
• D. mcs

Answer: A

NEW QUESTION 10

What is a SAN best practice when initially configuring a Linux FC boot LUN?

• A. Install the Host Utilities in the guest Linux OS.
• B. Map the WWPN of the target.
• C. Disable the HBA port with the host’s BIOS.
• D. Configure multipath to the LUN.

Answer: B

Explanation:
Reference: https://library.netapp.com/ecm/ecm_download_file/ECMP1217221

NEW QUESTION 11

Click the Exhibit button.

You notice that your volume named vol1 has a temporary volume that is doubling the space that is used by the volume.
In this scenario, which operation caused the volume to take up twice the space?

• A. FlexClone
• B. SnapRestore
• C. FlexGroup
• D. SnapMirror

Answer: D

Explanation:
Reference:
https://community.netapp.com/t5/Data-ONTAP-Discussions/Volume-takes-much-more-space-than- expected/td-p/100619

NEW QUESTION 12

You are installing a NetApp FAS6040 high availability storage system. Which cfmode should be set to ensure proper failover in an HP-UX environment?

• A. standby
• B. partner
• C. single system image
• D. dual_fabric

Answer: C

NEW QUESTION 13

You create a 20 GB LUN in a newly created 100 GB FlexVol volume. You then write 5 GB of data to the LUN. You have space reservation disabled on the LUN.
In this scenario, how much space do you have left on the volume?

• A. 95 GB
• B. 80 GB
• C. 75 GB
• D. 85 GB

Answer: A

Explanation:
Reference: https://library.netapp.com/ecmdocs/ECMP1368017/html/GUID-0E0B085C-5A42-43F3-9CCD- 4FD699BA6C89.html

NEW QUESTION 14

An administrator is configuring a SAN-only cluster. The data room that houses four AFF A220 controllers is small and not able to house the DS224C shelves. The administrator proposes to rack the shelves in a separate room that is 40 meters away from the controllers.
In this situation, how would you properly cable the controllers to the shelves?

• A. Use multimode passive optical cables.
• B. Use multimode active copper cables.
• C. Use multimode active optical cables.
• D. Use multimode passive copper cables.

Answer: C

NEW QUESTION 15

A customer has an existing legacy ISCSI storage environment that is connected to upstream network switches with various Windows hosts. The customer wants to purchase a new Netapp array to migrate
their data. In this scenario which two tools would help to validate the prerequisites for this Netapp configuration? (choose two)

• A. Interoperability Matrix Tool (IMT)
• B. Active IQ OneCollect
• C. Hardware Universe (HWU)
• D. Active IQ Config Advisor

Answer: AB

Explanation:
ActiveIQ OneCollect is a tool from NetApp that will create an inventory of your environment that will include hosts, switches and storage and validate it against the IMT (Interoperability Matrix Tool).

NEW QUESTION 16

You are asked to separate production FC traffic from test development FC traffic. In this scenario, at a minimum, which two configurations would accomplish this task? (choose two)

• A. VLANs
• B. Shared igroup
• C. SVMs
• D. Cisco VSANs

Answer: CD

Explanation:
SVMs will help us to separate traffic creating production_LIFs and development_LIFs VLANs will not affect anything, because it is asking about FC traffic
Cisco VSans will help us to create separate virtual SANs within the same switch.

NEW QUESTION 17

Referring to the exhibit, which WWPN would safely be removed from the zone?

• A. 50:0a:09:84:8d:7c:51:d5
• B. 20:09:00:a0:98:32:99:07
• C. 21:00:00:c0:dd:19:4b:f3
• D. 20:27:00:a0:98:32:99:07

Answer: C

Explanation:
Important:
A WWN pool can include only WWNNs or WWPNs in the ranges from 20:00:00:00:00:00:00:00 to 20:FF:FF:FF:FF:FF:FF:FF or from 50:00:00:00:00:00:00:00 to 5F:FF:FF:FF:FF:FF:FF:FF. All other WWN
ranges are reserved. To ensure the uniqueness of the Cisco UCS WWNNs and WWPNs in the SAN fabric, we recommend that you use the following WWN prefix for all blocks in a pool:
20:00:00:25:B5:XX:XX:XX
You can find more information on this link: https://www.cisco.com/en/US/docs/unified_computing/ucs/sw/cli/config/guide/1.4.1/CLI_Config_Guide_1_4_1

NEW QUESTION 18
......