Regenerate HPE0-S60 Test Question For Delta - HPE Compute Solutions Certification

NEW QUESTION 1
Your customer plans to deploy a VMware ESXi with HPE Synergy platform. They also plan a vSAN deployment leveraging HPE D3940 Storage Modules and SSD drives
The customer requested the following components:
- HPE Synergy frame with ten HPE Synergy 480 Gen10 Plus compute modules
- Two HPE Virtual Connect SE 100Gb F32 Modules for Synergy
- An appropriate number of vSAN Standard licenses for each compute node
- One HPE O3940 Storage Module with 40 SSDs - All required cables and options Which statement about this request is true?

• A. vSphere licenses should be added, as vSAN licenses do not replace vSphere licenses
• B. vSphere Standard licenses should be replaced with Enterprise Plus licenses to enable vSAN
• C. One HPE Virtual Connect SE 100Gb F32 Module for Synergy should be replaced with 50GD/S ILM
• D. 20 SSD drives should be removed from this setup, as D3940 supports only 20 SSD or SAS drives.

Answer: B

NEW QUESTION 2
You configured a vVoI datastore using HPE Storage integration Pack for VMware vCenter.
Which storage object should you check using SSMC to verify whether vVol datastore is configured property?

• A. App Volume Set
• B. Storage Container
• C. Virtual Volume Set
• D. virtual Volume

Answer: C

NEW QUESTION 3
You plan to configure a Link Aggregation Group (LAG) for two connections within a server profile for a compute node running an ESXI system.
What is required from the VMware side to enable LAG?

• A. Virtual Distributed Switch
• B. vSphere Standard license
• C. Load balancing cluster
• D. Dedicated VMKernel port

Answer: D

NEW QUESTION 4
Your customer has 6 logical enclosures spanning 18 HPE Synergy frames. The customer needs to add one more logical enclosure based on 5 HPE Synergy frames
How will this change impact the customer environment?

• A. The customer can add a new logical enclosure to the existing setup because the maximum number of logical enclosures in a single management ring is not reached.
• B. The customer has to expand the management ring capacity either by adding HPE Composer 2 modules or adding memory to reach 128GB per module.
• C. The customer has to create a new management ring for new logical enclosure because the maximum number of frames m a single management ring is reached.
• D. The customer can add a new logical enclosure to an existing setup once all required licenses are addedlo HPE OneView and associated with the new frames.

Answer: A

NEW QUESTION 5
Which statement about HPE OneView milestone releases is true?

• A. A milestone release is a release which must be installed on HPE Composer to support current version of the Service Pack for Synergy
• B. A milestone release is a release that is published when HPE releases new hardware components to immediately support new systems
• C. A milestone release is available for selected partners that give access to HPE OneView features which are not officially announced.
• D. A milestone release is a release with an enhanced update architecture mat is a prerequisite prior to updating to a subsequent release.

Answer: A

NEW QUESTION 6
Your customer needs to move an application from an HPE Synergy 480 Gen10 Compute Module to an HPE Synergy 660 Gen 10 Compute Module. The 480 has a switch that has been manually zoned outside of HPE OneView.
What must the customer do before migrating the application?

• A. Migrate the application to a Logical JBOD and connect it to the new server
• B. Copy the server profile and assign the clone to the new hardware
• C. Edit the server profile and change server hardware type
• D. Create a new server profile template and apply to the new hardware

Answer: C

NEW QUESTION 7
Your customer plans to use HPE Primera to boot HPE Synergy compute nodes. They currently have two HPE Virtual Connect SE 100Gb F32 Module for Synergy modules installed in the frame. The customer wants to use FC as a storage access protocol
What must be done to complete this task?

• A. Enable FC primary and secondary boot on the modules through the HPE OneView interface
• B. FC connectivity on the modules should be enabled through the service console by disabling FCoE.
• C. Add FC upgrade licenses in HPE OneView that will enable FC connectivity for the modules
• D. Enter both modules into a maintenance mode, then enable FC connectivity through CLI

Answer: B

NEW QUESTION 8
Your customer wants to compare HPE Superdome Flex with HPE Superdome Flex 280. Which statement about these two systems is true?

• A. Only HPE Superdome Rex 280 can be managed using HPE OneView
• B. Only HPE Superdome Flex supports HPE Persistent Memory
• C. Only HPE Superdome Flex 280 can support multiple nPars
• D. Only HPE Superdome Flex supports 32 sockets and 48TB of memory

Answer: A

NEW QUESTION 9
An administrator tries to open iLO interlace from HPE OneView Instead of being automatically logged in a login prompt displays
Where should you start the troubleshooting process?

• A. At the iLO interface to verify whether the ILO Advanced license is properly applied
• B. At HPE OneView Interface to verify whether the server is In the maintenance mode
• C. At the iLO interface to verify whether the SSO certificate is removed from an iLO.
• D. At HPE OneView Interface to verify whether the iLO processor is disabled

Answer: A

NEW QUESTION 10
Match HPE SimpliVity team with the definition.

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 11
In the past a customer experienced a networking issue where network ports went down and came back up in quick succession.
Which HPE Virtual Connect SE 100 GD F32 Module for HPE Synergy feature can be configured to disable such ports?

• A. Pause flood protection
• B. sFlow
• C. Storm control
• D. Port flap protection

Answer: B

NEW QUESTION 12
Your customer has a logical enclosure configured using a angle HPE Synergy frame with the following configuration
- two HPE Virtual Connect SE 100Gb F32 Modules for Synergy
- two HPE Synergy Virtual Connect SE 32Gb FC Modules -12 HPE Synergy 480 Gen10 Plus compute nodes with appropriate mezzanine cards
They plan to add a new HPE Synergy frame to an existing logical enclosure with the following configuration
- two HPE Synergy Virtual Connect SE 32Gb FC Modules
- two HPE Synergy 20Gb interconnect Link Modules
- Eight HPE Synergy 480 Gen 10 Plus compute nodes with appropriate mezzanine cards Which statement about the planned configuration change is true?

• A. Four compute modules must be moved to the second frame to balance the configuration
• B. The two HPE Synergy 20Gb interconnect Link Modules must be replace with the 50Gb option
• C. A license for an extended logical enclosure must be added to HPE OneView through GUI
• D. The HPE Synergy virtual Connect SE 32Gb FC Modules from both frames should be stacked

Answer: D

NEW QUESTION 13
Which statement about a new HPE SimpliVity deployment is true?

• A. New HPE SimpliVity deployments gives customer flexible choice of hypervisor
• B. A new HPE SimpliVity node can be a member of multiple dusters
• C. AM new HPE SimpliVity models are software optimized
• D. All new HPE SimpliVity models are based on mid CPUs

Answer: C

NEW QUESTION 14
Put the steps of the HPE infosight flow in the correct order.

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 15
Which HPE Virtual Connect feature allows an administrator to suppress excessive inbound multicast broadcast and destination lookup failure (OLF) packets?

• A. Pause flood protection
• B. Loop protection
• C. LLDP tagging
• D. Storm control

Answer: D

NEW QUESTION 16
Match each HPE Synergy logical component with the definition.

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 17
You need to setup HPE Synergy frames after hardware components are discovered within HPE OneView. Put the steps to achieve this goal into the coned order in the answer area on the right.

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 18
Your customer reports mat an external FC boot volume for Windows server is visible four times in the Disk Management 1 online and 3 offline.
What should you do to resolve this issue?

• A. Disable deduplication for this volume at the array level
• B. Remove the offline disks using array management tools
• C. Install and configure MPIO on me Windows system
• D. Remove the offline disks using Windows Disk Management

Answer: C

NEW QUESTION 19
......