★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions
Free Instant Download NEW 70-410 Exam Dumps (PDF & VCE):
Available on:
https://www.certleader.com/70-410-dumps.html
Exam Code: 70-410 (Practice Exam Latest Test Questions VCE PDF)
Exam Name: Installing and Configuring Windows Server 2012
Certification Provider: Microsoft
Free Today! Guaranteed Training- Pass 70-410 Exam.
2021 Mar 70-410 actual exam
Q11. - (Topic 1)
You have a server named Server1 that runs Windows Server 2012 R2.
You plan to use Windows PowerShell Desired State Configuration (DSC) to confirm that the Application Identity service is running on all file servers.
You define the following configuration in the Windows PowerShell Integrated Scripting Environment (ISE):
You need to use DSC to configure Server1 as defined in the configuration.
What should you run first?
A. Service1
B. Configuration1
C. Start DscConfiguration
D. Test-DscConfigu ration
Answer: B
Q12. - (Topic 2)
You have a server named Corel that has a Server Core Installation of Windows Server 2012 R2.
Corel has the Hyper-V server role installed. Corel has two network adapters from different third-party hardware vendors.
You need to configure network traffic failover to prevent connectivity loss if a network adapter fails.
What should you use?
A. New-NetSwitchTeam
B. Install-Feature
C. Add-NetSwitchTeamMember
D. Netsh.exe
Answer: A
Q13. - (Topic 2)
Your network contains a server named Server1 that runs Windows Server 2012 R2.Server1 has the Hyper-V server role installed. Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4.Server1 is configured as shown in the following table.
You need to configure VM4 to track the CPU, memory, and network usage.
What should you configure?
A. NUMA topology
B. Resource control
C. Resource metering
D. Virtual Machine Chimney
E. The VLAN ID
F. Processor Compatibility
G. The startup order
H. Automatic Start Action
I. Integration Services
J. Port mirroring K. Single-root I/O virtualization
Answer: C
Explanation:
Metrics collected for each virtual machine using resource metering: Average CPU usage, measured in megahertz over a period of time. Average physical memory usage, measured in megabytes. Minimum memory usage (lowest amount of physical memory). Maximum memory usage (highest amount of physical memory). Maximum amount of disk space allocated to a virtual machine. Total incoming network traffic, measured in megabytes, for a virtual network adapter. Total outgoing network traffic, measured in megabytes, for a virtual network adapter
: http://blogs.technet.com/b/meamcs/archive/2012/05/28/hyper-v-resource-metering-in-windows-server-2012-server-8-beta.aspx
Q14. - (Topic 2)
You plan to deploy a file server to a temporary location.
The temporary location experiences intermittent power failures.
The file server will contain a dedicated volume for shared folders.
You need to create a volume for the shared folders. The solution must minimize the
likelihood of file corruption if a power failure occurs.
Which file system should you use?
A. NFS
B. FAT32
C. ReFS
D. NTFS
Answer: C
Explanation:
The ReFS file system allows for resiliency against corruptions with the option to salvage amongst many other key features like Metadata integrity with checksums, Integrity streams with optional user data integrity, and shared storage pools across machines for additional failure tolerance and load balancing, etc.
Q15. - (Topic 3)
You have an Active Directory domain named contoso.com. You have a domain controller named Server1 that is configured as a DNS server. Server1 hosts a standard primary zone for contoso.com. The DNS configuration of Server1 is shown in the exhibit.
You discover that stale resource records are not automatically removed from the contoso.com zone.
You need to ensure that the stale resource records are automatically removed from the contoso.com zone.
What should you do?
A. Set the scavenging period of Server1 to 0 days.
B. Modify the Server Aging/Scavenging properties.
C. Configure the aging properties for the contoso.com zone.
D. Convert the contoso.com zone to an Active Directory-integrated zone.
Answer: C
Explanation:
Scavenging or aging as it is also known as automates the deletion of old records. When scavenging is disabled, these records must be deleted manually or the size of the DNS database can become large and have an adverse effect on performance. In the exhibit it shows that scavenging is enabled on Server1, thus you should configure the aging properties for the zone.
Leading 70-410 free question:
Q16. - (Topic 2)
Your company has a main office and four branch offices. The main office contains a server named Server1 that runs Windows Server 2012 R2.
The IP configuration of each office is configured as shown in the following table.
You need to add a single static route on Server1 to ensure that Server1 can communicate with the hosts on all of the subnets.
Which command should you run?
A. route.exe add -p 10.10.0.0 mask 255.255.252.0 10.10.0.1
B. route.exe add -p 172.16.16.0 mask 255.255.252.0 10.10.0.1
C. route.exe add -p 10.10.0.0 mask 255.255.252.0 172.16.0.0
D. route.exe add -p 172.16.18.0 mask 255.255.252.0 10.10.0.1
Answer: B
Explanation:
These parameters will allow communication with all the hosts.
References:
Exam Ref: 70-410: Installing and Configuring Windows Server 2012 R2, Chapter4:
Deploying and configuring core network services, Objective 4.1: Configure IPv4 and IPv6
addressing, p.192, 196
Q17. Your network contains an Active Directory forest. The forest contains two domains named contoso.com and corp.contoso.com. The forest contains four domain controllers. The domain controllers are configured as shown in the following table.
All domain controllers are DNS servers. In the corp.contoso.com domain, you plan to deploy a new domain controller named DC5.
You need to identify which domain controller must be online to ensure that DC5 can be promoted successfully to a domain controller.
Which domain controller should you identify?
A. DC1
B. DC2
C. DC3
D. DC4
Answer: C
Q18. - (Topic 2)
Your network contains an Active Directory domain named contoso.com.
An organizational unit (OU) named OU1 contains user accounts and computer accounts.
A Group Policy object (GPO) named GP1 is linked to the domain.GP1 contains Computer Configuration settings and User Configuration settings.
You need to prevent the User Configuration settings in GP1 from being applied to users. The solution must ensure that the Computer Configuration settings in GP1 are applied to all client computers.
What should you configure?
A. The GPO Status
B. The Block Inheritance feature
C. The Group Policy loopback processing mode
D. The Enforced setting
Answer: C
Explanation:
A loopback with merge option needs to be used.
Q19. - (Topic 2)
You have a server named Server1 that runs Windows Server 2012 R2.
You try to install the Microsoft .NET Framework 3.5 Features feature on Server1, but the
installation fails repeatedly.
You need to ensure that the feature can be installed on Server1.
What should you do?
A. Install Windows Identity Foundation (WIF) 3.5.
B. Install the Web Server (IIS) server role.
C. Connect Server1 to the Internet.
D. Run the Add-AppxProvisionedPackage cmdlet.
Answer: C
Explanation:
The files needed are no longer available on the local Hard drive. We need to connect the server to the Internet. Important to note that when starting with Windows Server 2012 R2 and Windows 8, the feature files for .NET Framework 3.5 (which includes .NET Framework 2.0 and .NET Framework 3.0) are not available on the local computer by default. The files have been removed. Files for features that have been removed in a Features on Demand configuration, along with feature files for .NET Framework 3.5, are available through Windows Update. By default, if feature files are not available on the destination server that is running Windows Server 2012 R2 Preview or Windows Server 2012 R2, the installation process searches for the missing files by connecting to Windows Update. You can override the default behavior by configuring a Group Policy setting or specifying an alternate source path during installation, whether you are installing by using the Add Roles and Features Wizard GUI or a command line.
Q20. - (Topic 3)
Your network contains one Active Directory domain named contoso.com. The domain contains 10 domain controllers and a read-only domain controller (RODC) named RODC01.
You plan to replace a domain controller named DC1. DC1 has the schema operations master role.
You need to transfer the schema master role to another domain controller named DC10 before you remove Active Directory from DC1.
Which tool should you use?
A. the ntdsutil command
B. the Set-ADDomain cmdlet
C. the Install-ADDSDomain cmdlet
D. the dsadd command
E. the dsamain command
F. the dsmgmt command
G. the net user command
H. the Set-ADForest cmdlet
Answer: A
Explanation: To transfer the schema master role using the command line:
Open Command Prompt.
Type:.ntdsutil
At the ntdsutil command prompt, type:.roles
...
.. ..
At the fsmo maintenance command prompt, type:.connection At the server connections command prompt, type:.connect to serverDomainController At the server connections command prompt, type:.quit At the fsmo maintenance command prompt, type:.transfer schema master
Reference: Transfer the schema master role