★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions
Free Instant Download NEW 70-410 Exam Dumps (PDF & VCE):
Available on:
https://www.certleader.com/70-410-dumps.html
Want to know Examcollection 70-410 Exam practice test features? Want to lear more about Microsoft Installing and Configuring Windows Server 2012 certification experience? Study Best Quality Microsoft 70-410 answers to Most up-to-date 70-410 questions at Examcollection. Gat a success with an absolute guarantee to pass Microsoft 70-410 (Installing and Configuring Windows Server 2012) test on your first attempt.
2021 Mar 70-410 testing engine
Q41. - (Topic 1)
Your network contains an Active Directory domain named adatum.com. The domain contains a member server named Host1. Host1 runs Windows Server 2012 R2 and has the Hyper-V server role installed.
Host1 hosts two virtual machines named VM5 and VM6. Both virtual machines connect to a virtual switch named Virtual1.
On VM5, you install a network monitoring application named Monitor1.
You need to capture all of the inbound and outbound traffic to VM6 by using Monitor1.
Which two commands should you run from Windows PowerShell? (Each correct answer presents part of the solution. Choose two.)
A. Get-VM “VM6 | Set-VMNetworkAdapter-IovWeight 1
B. Get-VM “VM5 I Set-VMNetworkAdapter -IovWeight 0
C. Get-VM “VM5 | Set-VMNetworkAdapter -PortMirroring Source
D. Get-VM “VM6 | Set-VMNetworkAdapter -AllowTeaming On
E. Get-VM “VM6 | Set-VMNetworkAdapter -PortMirroring Destination
F. Get-VM “VM5 | Set-VMNetworkAdapter -AllowTeaming On
Answer: C,E
Explanation:
-PortMirroring specifies the port mirroring mode for the network adapter. This can be set to None, Source, and Destination. . If set to Source, a copy of every network packet it sends or receives is forwarded to a virtual network adapter configured to receive the packets. . If set to Destination, it receives copied packets from the source virtual network adapter.
In this scenario, VM5 is the destination which must receive a copy of the network packets from VM6, which s the source.
Reference: http://technet.microsoft.com/en-us/library/hh848457.aspx
Q42. - (Topic 3)
You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers in the Contoso.com domain, including domain controllers, have Windows Server 2012 R2 installed.
Contoso.com has a Hyper-V server, named ENSUREPASS-SR13, which hosts multiple virtual machines.
You have enabled the use of Single-root I/O virtualization.
Which of the following is TRUE with regards to using Single-root I/O virtualization? (Choose all that apply.)
A. It maximizes network throughput, while minimizing network latency.
B. It maximizes network throughput, as well as network latency.
C. It avoids the virtual switch stack and allows the virtual machine direct access to the actual network switch.
D. It prevents the virtual machine from accessing the network switch directly.
Answer: A,C
Explanation:
SR-IOV enables network traffic to bypass the software switch layer of the Hyper-V virtualizationstack. Because the VF is assigned to a child partition, the network traffic flows directly between the VF and child partition. As a result, the I/O overhead in the software emulation layer is diminished and achieves network performance that is nearly the same performance as in nonvirtualized environments.
Q43. - (Topic 3)
You have a DNS server named DNS1 that runs windows server 2012 R2.
DNS1 is used to resolve the names of internet resources by using several DNS forwarders.
You need to prevent DNS1 from performing iterative queries if the DNS forwarders are unable to reslove the queries.
Which cmdlet should you use?
A. Remove-DNSServerRootHint
B. Set-DNSServerPrimaryZone
C. Ser-DNSServerGlobalNameZone
D. Unregister-DNSserverDrirectoryPartition
Answer: A
Q44. DRAG DROP - (Topic 1)
You have a server named Server1 that runs Windows Server 2012 R2.
You need to create a new volume on Server1.
The new volume must have the following configurations: Be stored on a new virtual hard disk Be assigned the drive letter G Have the NTFS file system In which order should you run the Diskpart commands?
To answer, move all the Diskpart commands from the list of commands to the answer area and arrange them in the correct order.
Answer:
Q45. - (Topic 3)
Your network contains an active directory domain named Contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2 and has the Hyper-V server role installed. You have a virtual machine named VM1. VM1 has a snapshot. You need to modify the Snapshot File Location of VM1.
What should you do first?
A. Copy the snapshot file
B. Pause VM1
C. Shut down VM1
D. Delete the snapshot
Answer: D
Explanation:
Snapshot data files are stored as .avhd files. Taking multiple snapshots can quickly consume storage space. In the first release version of Hyper-V (KB950050) and in Hyper-V in Windows Server 2008 Service Pack 2, snapshot, snapshot data files usually are located in the same folder as the virtual machine by default. In Hyper-V in Windows Server 2008 R2, the files usually are located in the same folder as the virtual hard disk. The following exceptions affect the location of the snapshot data files: If the virtual machine was imported with snapshots, they are stored in their own folder. If the virtual machine has no snapshots and you configure the virtual machine snapshot setting, all snapshots you take afterwards will be stored in the folder you specify. Caution Do not delete .avhd files directly from the storage location. Instead, use Hyper-V Manager to select the virtual machine, and then delete the snapshots from the snapshot tree. Do not expand a virtual hard disk when it is used in a virtual machine that has snapshots. Doing so will make the snapshots unusable. http://technet.microsoft.com/en-us/library/dd560637(v=ws.10).aspx
Improve 70-410 free exam questions:
Q46. HOTSPOT - (Topic 1)
You have a print server named Server1 that runs Windows Server 2012 R2.
On Server1, you create and share a printer named Printer1.
The Advanced settings of Printer1 are shown in the Advanced exhibit. (Click the Exhibit
button.)
The Security settings of Printer1 are shown in the Security exhibit. (Click the Exhibit button.)
The Members settings of a group named Group1 are shown in the Group1 exhibit. (Click the Exhibit button.)
Select Yes if the statement can be shown to be true based on the available information; otherwise select No. Each correct selection is worth one point.
Answer:
Q47. DRAG DROP - (Topic 3)
Your network contains an Active Directory domain named contoso.com. The domain contains a file server named File1. All servers in the domain run Windows Server 2012 R2.
You need to create a new volume on File1.
The new volume must have the following configurations:
Have the drive letter T
Have the FAT32 file system
Be stored on a new virtual hard disk
In which order should you run the Diskpart commands?
To answer, move all the Diskpart commands from the list of commands to the answer area and arrange them in the correct order.
Answer:
Q48. - (Topic 1)
You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed. Server1 is connected to two Fibre Channel SANs and is configured as shown in the following table.
You have a virtual machine named VM1.
You need to configure VM1 to connect to SAN1.
What should you do first?
A. Add one HBA
B. Create a Virtual Fibre Channel SAN.
C. Create a Hyper-V virtual switch.
D. Configure network adapter teaming.
Answer: B
Explanation:
You need your virtualized workloads to connect easily and reliably to your existing storage
arrays.
Windows Server 2012 provides Fibre Channel ports within the guest operating system,
which allows you to connect to Fibre Channel directly from within virtual machines. This
feature protects your investments in Fibre Channel, enables you to virtualize workloads that use direct access to Fibre Channel storage, allows you to cluster guest operating systems over Fibre Channel, and provides an important new storage option for servers hosted in your virtualization infrastructure. With this Hyper-V virtual Fibre Channel feature, you can connect to Fibre Channel storage from within a virtual machine. This allows you to use your existing Fibre Channel investments to support virtualized workloads. Support for Fibre Channel in Hyper-V guests also includes support for many related features, such as virtual SANs, live migration, and MPIO.
Q49. - (Topic 1)
Your network contains an Active Directory forest named contoso.com. The forest contains a single domain. The domain contains two domain controllers named DC1 and DC2 that run Windows Server 2012 R2.
The domain contains a user named User1 and three global security groups named Group1, Group2 and, Group3.
You need to add User1 to Group1, Group2, and Group3.
Which cmdlet should you run?
A. Add-AdPrincipalGroupMembership
B. Install-AddsDomainController
C. Install-WindowsFeature
D. Install-AddsDomain
E. Rename-AdObject
F. Set-AdAccountControl
G. Set-AdGroup
H. Set-User
Answer: A
Explanation:
The Add-ADPrincipalGroupMembershipcmdlet adds a user, group, service account, or computer as a new member to one or more Active Directory groups.
References:
http://technet.microsoft.com/en-us/library/ee617203.aspx http://technet.microsoft.com/en-us/library/hh974723.aspx
Q50. HOTSPOT - (Topic 3)
Your network contains an Active Directory domain. The domain contains a server named Server28.
The computer account of Server 28 is located in an organizational unit (OU) named OU1. A Group Policy object (GPO) named Application Restriction Policy is linked to OU1.
The settings of the GPO are configured as shown in the GPO Settings exhibit. (Click the Exhibit button.)
The Services console on Server28 is shown in the Services exhibit. (Click the Exhibit
button.)
Select Yes if the statement can be shown to be true based on the available information; otherwise select No. Each correct selection is worth one point.
Answer: