★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions
Free Instant Download NEW 350-080 Exam Dumps (PDF & VCE):
Available on:
https://www.certleader.com/350-080-dumps.html
It is more faster and easier to pass the Cisco 350-080 exam by using Accurate Cisco CCIE Data Center Written Exam questuins and answers. Immediate access to the Refresh 350-080 Exam and find the same core area 350-080 questions with professionally verified answers, then PASS your exam with a high score now.
2021 Sep 350-080 written exam:
Q61. Refer to the exhibit.
The network topology that is shown in the exhibit has two aggregation switches (SW1 and SW2). The access layer switch connects to both aggregation switches. On SW1 and SW2, ports connecting to the access layer switches are configured as vPC member ports. SW1 and SW2 are also connected using a port channel that is configured as a vPC peer link. Which statement describes the use of the vPC peer-keepalive link in this topology?
A. The peer-keepalive link is used for synchronizing MAC addresses between Agg1 and Agg2.
B. The peer-keepalive link is used for control plane traffic. The peer link is used for the data plane.
C. The peer-keepalive link is used to resolve dual-active scenarios, where the peer link connectivity is lost.
D. The peer-keepalive link is used for the communication of orphaned ports.
Answer: C
Q62. Which attribute is used to pass the user role back to the Nexus when remote AAA is enabled?
A. Cisco AV-pair
B. TACACS+ or RADIUS ack frame role attribute
C. DH-CHAP challenge attribute
D. privilege level attribute
Answer: A
Q63. How many concurrent GUI logins are possible per user account on Cisco UCS Manager?
A. 128
B. 96
C. 64
D. 32
Answer: D
Q64. Refer to the exhibit.
According to the equipment tab in Cisco UCS Manager, which is true?
A. A is an uplink port, B is a fabric port, C is a server port, D is a backplane port, E is a DCE interface, and F is a vNIC
B. A is an uplink port, B is a server port, C is a fabric port, D is a backplane port, E is a DCE interface, and F is a vNIC
C. A is an uplink port, B is a fabric port, C is a backplane port, D is a server port, E is a DCE interface, and F is a vNIC
D. A is an uplink port, B is a server port, C is a fabric port, D is a DCE interface, E is a backplane port, and F is a vNIC
E. A is an fabric port, B is a downlink port, C is an uplink port, D is a server port, E is a VIC interface, and F is a vNIC
Answer: B
Q65. Regarding disk scrub, which two of these occur to the data on any local drives upon disassociation? (Choose two.)
A. If disk scrub is enabled, all BIOS settings for the server are erased.
B. If disk scrub is enabled, all the data access on any local drives is destroyed.
C. If disk scrub is enabled, the LSI active RAID is destroyed but data is still preserved.
D. If disk scrub is disabled, all data on any local drives is preserved, including the local storage configuration.
E. If disk scrub is enabled, all data on any local drives is preserved, including the local storage configuration.
Answer: B,D
Improved cisco 350-080 dump:
Q66. Refer to the exhibit.
What is the most likely reason for the output that is shown in bold in the exhibit?
A. One or more of the VLANs that are assigned to the vNIC have been deleted from Cisco UCS Manager.
B. One or more of the VLANs that are assigned to the vNIC are assigned to different disjoint Layer 2 uplinks.
C. There are no Ethernet uplinks that are enabled.
D. The host to which the vNIC belongs is currently powered off.
E. The vNIC is currently active and uses the fabric failover peer vNIC.
Answer: B
Q67. In the event of a catastrophic disaster, after which you need to replace the entire UCS blade system (that is, new fabric interconnects, new IOMs, new chassis, and new blades), what type of backup would provide the most complete set of information?
A. logical configuration
B. all configuration
C. full state
D. system configuration
Answer: C
Q68. Refer to the exhibit.
Which statement about the interface that is connected to the NPV core switch is true?
A. The switch that connects to the hosts is identified in the design as an NPV edge switch, and the port that connects to the core is an NP port.
B. The interface that is connected to the NPV switch will need to be configured as an N-Port.
C. The interface that is connected to the NPV core will become an FP port.
D. The link between the NPV core switch and edge will come up as an E port.
Answer: A
Q69. In a configuration with redundant supervisors, how many IP addresses are required to configure full remote access via management 0?
A. Two IP addresses, one for each supervisor
B. Three IP addresses, one virtual IP and one physical IP for each supervisor
C. One IP address that is shared among supervisors
D. None—management 0 will use the IP address from the first SVI that is created
Answer: C
Q70. A network administrator has installed an N7K-F248-25XP module into an existing chassis. The module is powered on, but the interfaces are all in VDC0. What is the reason for this?
A. The chassis needs an EPLD upgrade to support the new module type.
B. The default VDC cannot support F2 modules.
C. The interfaces must be allocated into a VDC for F2 modules only.
D. The module has failed GOLD diagnostics, and the switch has isolated the ports to protect the
integrity of the system.
Answer: C