★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions

Free Instant Download NEW 200-125 Exam Dumps (PDF & VCE):
Available on: https://www.certleader.com/200-125-dumps.html


Cisco 200-125 the answers from Testking keep your usual classrooms training prerequisites. Theres no need to help excavate designed for Cisco 200-125 Braindumps often. Rescue their life from scheduled training timings and also golf swing within the new era of Testking Train Checkups your own personal acceleration. If you ever get ready for the actual examinations employing each of our Testking 200-125, You can certainly make money for IT qualification inside the earliest endeavor.

2021 Sep 200-125 simulations

Q1. - (Topic 8) 

A network administrator needs to configure a serial link between the main office and a remote location. The router at the remote office is a non-Cisco router. How should the network administrator configure the serial interface of the main office router to make the connection? 

A. Main(config)# interface serial 0/0 

Main(config-if)# ip address 172.16.1.1 255.255.255.252 

Main(config-if)# no shut 

B. Main(config)# interface serial 0/0 

Main(config-if)# ip address 172.16.1.1 255.255.255.252 

Main(config-if)# encapsulation ppp 

Main(config-if)# no shut 

C. Main(config)# interface serial 0/0 

Main(config-if)# ip address 172.16.1.1 255.255.255.252 

Main(config-if)# encapsulation frame-relay 

Main(config-if)# authentication chap 

Main(config-if)# no shut 

D. Main(config)# interface serial 0/0 

Main(config-if)#ip address 172.16.1.1 255.255.255.252 

Main(config-if)#encapsulation ietf 

Main(config-if)# no shut 

Answer: B 


Q2. - (Topic 1) 

What is the difference between a CSU/DSU and a modem? 

A. A CSU/DSU converts analog signals from a router to a leased line; a modem converts analog signals from a router to a leased line. 

B. A CSU/DSU converts analog signals from a router to a phone line; a modem converts digital signals from a router to a leased line. 

C. A CSU/DSU converts digital signals from a router to a phone line; a modem converts analog signals from a router to a phone line. 

D. A CSU/DSU converts digital signals from a router to a leased line; a modem converts digital signals from a router to a phone line. 

Answer: D 


Q3. - (Topic 7) 

What are three factors a network administrator must consider before implementing Netflow 

in the network? (Choose three.) 

A. CPU utilization 

B. where Netflow data will be sent 

C. number of devices exporting Netflow data 

D. port availability 

E. SNMP version 

F. WAN encapsulation 

Answer: A,B,C 


Q4. - (Topic 4) 

Refer to the exhibit. 


What commands must be configured on the 2950 switch and the router to allow communication between host 1 and host 2? (Choose two.) 

A. Router(config)# interface fastethernet 0/0 

Router(config-if)# ip address 192.168.1.1 255.255.255.0 

Router(config-if)# no shut down 

B. Router(config)# interface fastethernet 0/0 

Router(config-if)# no shut down 

Router(config)# interface fastethernet 0/0.1 

Router(config-subif)# encapsulation dot1q 10 

Router(config-subif)# ip address 192.168.10.1 255.255.255.0 

Router(config)# interface fastethernet 0/0.2 

Router(config-subif)# encapsulation dot1q 20 

Router(config-subif)# ip address 192.168.20.1 255.255.255.0 

C. Router(config)# router eigrp 100 

Router(config-router)# network 192.168.10.0 

Router(config-router)# network 192.168.20.0 

D. Switch1(config)# vlan database 

Switch1(config-vlan)# vtp domain XYZ 

Switch1(config-vlan)# vtp server 

E. Switch1(config)# interface fastethernet 0/1 

Switch1(config-if)# switchport mode trunk 

F. Switch1(config)# interface vlan 1 

Switch1(config-if)# ip default-gateway 192.168.1.1 

Answer: B,E 


Q5. - (Topic 4) 

Which two locations can be configured as a source for the IOS image in the boot system command? (Choose two.) 

A. RAM 

B. NVRAM 

C. flash memory 

D. HTTP server 

E. TFTP server 

F. Telnet server 

Answer: C,E 


200-125 practice

Improve 200-125 exam fees:

Q6. - (Topic 4) 

Refer to the exhibit. 


The two exhibited devices are the only Cisco devices on the network. The serial network between the two devices has a mask of 255.255.255.252. Given the output that is shown, what three statements are true of these devices? (Choose three.) 

A. The Manchester serial address is 10.1.1.1. 

B. The Manchester serial address is 10.1.1.2. 

C. The London router is a Cisco 2610. 

D. The Manchester router is a Cisco 2610. 

E. The CDP information was received on port Serial0/0 of the Manchester router. 

F. The CDP information was sent by port Serial0/0 of the London router. 

Answer: A,C,E 


Q7. - (Topic 9) 

Which command sequence can you enter to create VLAN 20 and assign it to an interface on a switch? 

A. Switch(config)#vlan 20 

Switch(config)#Interface gig x/y 

Switch(config-if)#switchport access vlan 20 

B. Switch(config)#Interface gig x/y 

Switch(config-if)#vlan 20 

Switch(config-vlan)#switchport access vlan 20 

C. Switch(config)#vlan 20 

Switch(config)#Interface vlan 20 

Switch(config-if)#switchport trunk native vlan 20 

D. Switch(config)#vlan 20 

Switch(config)#Interface vlan 20 

Switch(config-if)#switchport access vlan 20 

E. Switch(config)#vlan 20 

Switch(config)#Interface vlan 20 

Switch(config-if)#switchport trunk allowed vlan 20 

Answer: A 


Q8. - (Topic 2) 

Which two benefits are provided by creating VLANs? (Choose two.) 

A. added security 

B. dedicated bandwidth 

C. provides segmentation 

D. allows switches to route traffic between subinterfaces 

E. contains collisions 

Answer: A,C 


Q9. - (Topic 4) 

What is a global command? 

A. a command that is set once and affects the entire router 

B. a command that is implemented in all foreign and domestic IOS versions 

C. a command that is universal in application and supports all protocols 

D. a command that is available in every release of IOS, regardless of the version or deployment status 

E. a command that can be entered in any configuration mode 

Answer: A 


Q10. - (Topic 3) 

The network administrator has been asked to give reasons for moving from IPv4 to IPv6. What are two valid reasons for adopting IPv6 over IPv4? (Choose two.) 

A. no broadcast 

B. change of source address in the IPv6 header 

C. change of destination address in the IPv6 header 

D. Telnet access does not require a password 

E. autoconfiguration 

F. NAT 

Answer: A,E