Far Out 201 Free Exam Questions For TMOS Administration Certification

NEW QUESTION 1
Refer to the exhibit.

A BIG-IP Administrator creates a new Virtual Server. The end user is unable to access the page. During troubleshooting, the administrator learns that the connection between the BIG-IP system and server is NOT set up correctly.
What should the administrator do to solve this issue?

• A. Disable Address Translation
• B. Set Address Translation to Auto Map, configure a SNAT pool, and have pool members in the same subnet of the servers
• C. Set Address Translation to SNAT and configure a specific translation address
• D. Set Address Translation to SNAT and have self-IP configured in the same subnet of servers

Answer: C

Explanation:
The status of the pool can be seen that the members are all up, indicating that the network from F5 to the server is no problem, so there is no need to configure selfip on the same subnet. The monitor is normal but the access is not normal, you have to consider the problem of snat, you can configure automap or configure snat and specify snat ip.

NEW QUESTION 2
A BIG-IP Administrator suspects that one of the BIG-IP device power supplies is experiencing power outages.
Which log file should the BIG-IP Administrator check to verify the suspicion?

• A. /war /log/daemon.log
• B. /var/log/kern.log
• C. /var/log/ltm
• D. /var/log/audit

Answer: C

NEW QUESTION 3
Which event is always triggered when a client initially connects to a virtual server configured with an HTTP profile?

• A. HTTP_DATA
• B. CLIENT_DATA
• C. HTTP_REQUEST
• D. CLIENT_ACCEPTED

Answer: D

NEW QUESTION 4
The BIG-IP Administrator generates QKView using tmsh command "qkview -SO". In which directory does the BIG-IP appliance save the QKView?

• A. /etc/tmp
• B. /var/tmp
• C. /shared/qkview
• D. /var /tmp/qkview

Answer: B

NEW QUESTION 5
The BIG-IP Administrator needs to perform a BIG-IP device upgrade to the latest version of TMOS. Where can the administrator obtain F5 documentation on upgrade requirements?

• A. AskF5
• B. DevCentral
• C. Bug Tracker
• D. iHealth

Answer: A

NEW QUESTION 6
A BIG-IP device has only LTM and ASM modules provisioned. Both have nominal provisioning level. The BI6-IP Administrator wants to dedicate more resources to the LTM module. The ASM module must remain enabled. Which tmsh command should the BIG-IP Administrator execute to obtain the desired result?

• A. modify/sys provision asm level minimum
• B. modify /sys provision Itm level dedicated
• C. modify /sys provision asm level none
• D. modify /sys provision Itm level minimum

Answer: A

NEW QUESTION 7
The BIG-IP appliance fails to boot. The BIG-IP Administrator needs to run the End User Diagnostics (EUD) utility to collect data to send to F5 Support.
Where can the BIG-IP Administrator access this utility?

• A. Console Port
• B. Internal VLAN interface
• C. External VLAN interface
• D. Management Port

Answer: A

NEW QUESTION 8
Active connections to pool members are unevenly distributed. The load balancing method is Least Connections (member) Priority Group Activation is disabled. What is a potential cause of the event distribution?

• A. Priority Group Activation is disabled
• B. SSL Profile Server is applied
• C. Persistence profile is applied
• D. incorrect load balancing method

Answer: C

NEW QUESTION 9
Users report that traffic is negatively affected every time a BIG-IP device fails over. The traffic becomes stabilized after a few minutes.
What should the BIG-IP Administrator do to reduce the impact of future failovers?

• A. Enable Failover Multicast Configuration
• B. Set up Failover Method to HA Order
• C. Configure MAC Masquerade
• D. Configure a global SNAT Listener

Answer: C

NEW QUESTION 10
A BIG-IP Administrator adds new Pool Members into an existing, highly utilized pool. Soon after, there are reports that the application is failing to load for some users. What pool level setting should the BIG-IP Administrator check?

• A. Availability Requirement
• B. Allow SNAT
• C. Action On Service Down
• D. Slow Ramp Time

Answer: D

Explanation:
Option ABC is a global configuration, has nothing to do with the new pool member, select D after excluding

NEW QUESTION 11
Which three iRule events are likely to be seen in iRules designed to select a pool for load balancing? (Choose three.)

• A. CLIENT_DATA
• B. SERVER_DATA
• C. HTTP_REQUEST
• D. HTTP_RESPONSE
• E. CLIENT_ACCEPTED
• F. SERVER_SELECTED
• G. SERVER_CONNECTED

Answer: ACE

NEW QUESTION 12
A BIG-IP Administrator configures remote authentication and needs to make sure that users can still login even when the remote authentication server is unavailable.
Which action should the BIG-IP Administrators in the remote authentication configuration to meet this requirement?

• A. Set partition access to "All"
• B. Enable the Fallback to Local option
• C. Configure a remote role grove
• D. Configure a second remote user directory

Answer: B

NEW QUESTION 13
A BIG-IP device sends out the following SNMP trap:
big-ipo.f5.com - bigipExternalLinkChange Link: 1.0 is DOWN
Where in the BIG-IP Configuration utility should the BIG-IP Administrator verify the current status of Link 1.0?

• A. System > Platform
• B. Network > Trunks > Trunk List
• C. Statistics > Performance > System
• D. Network > Interfaces > Interface List

Answer: D

Explanation:
1.1 is a physical interface, you can see the interface status from the physical interface in the network.

NEW QUESTION 14
Assume a client's traffic is being processed only by a NAT; no SNAT or virtual server processing takes place. Also assume that the NAT definition specifies a NAT address and an origin address while all other settings are left at their defaults. If a client were to initiate traffic to the NAT address, what changes, if any, would take place when the BIG-IP processes such packets?

• A. The source address would not change, but the destination address would be translated to the origin address.
• B. The destination address would not change, but the source address would be translated to the origin address.
• C. The source address would not change, but the destination address would be translated to the NAT's address.
• D. The destination address would not change, but the source address would be translated to the NAT's address.

Answer: A

NEW QUESTION 15
A BIG-IP Administrator must configure the BIG-IP device to send system log messages to a remote syslog server In addition, the log messages need to be sent over TCP for guaranteed delivery. What should the BIG-IP Administrator configure?

• A. syslog-ng
• B. Request Logging Profile
• C. HSL Logging
• D. Remote Logging

Answer: D

NEW QUESTION 16
A BIG-IP Administrator needs to remove a pool specific health monitor. There is a pool named Best Pool with two members, one named Best pool member and one named Best pool member2. In the Local Traffic section of the administrative GUI, which stops should the BIG-IP Administrator take to remove a pool level monitor?

• A. Pool > Pool List > Best Pool > Members > Health Monitors
• B. Nodes > Node List> Best _pool_memberl > Heath Monitors
• C. Monitors > Monitor Name> Instances
• D. Pool > Pool List> Best Pool > Health Monitors

Answer: D

NEW QUESTION 17
A virtual server is defined per the charts. The last five client connections were to members C, D, A, B, B. Given the conditions shown in the above graphic, if a client with IP address 205.12.45.52 opens a connection to the virtual server, which member will be used for the connection.

• A. 172.16.20.1:80
• B. 172.16.20.2:80
• C. 172.16.20.3:80
• D. 172.16.20.4:80
• E. 172.16.20.5:80

Answer: D

NEW QUESTION 18
Assume a virtual server has a ServerSSL profile. What SSL certificates are required on the BIG-IP?

• A. No SSL certificates are required on the BIG-IP.
• B. The BIG-IP's SSL certificates must only exist.
• C. The BIG-IP's SSL certificates must be issued from a certificate authority.
• D. The BIG-IP's SSL certificates must be created within the company hosting the BIG-IPs.

Answer: A

NEW QUESTION 19
......