★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions

Free Instant Download NEW 200-120 Exam Dumps (PDF & VCE):
Available on: https://www.certleader.com/200-120-dumps.html


Vivid of 200-120 latest exam materials and guidance for Cisco certification for IT professionals, Real Success Guaranteed with Updated 200-120 pdf dumps vce Materials. 100% PASS CCNA Cisco Certified Network Associate CCNA (803) exam Today!

2021 Feb cisco ccna routing and switching 200-120 network simulator download:

Q91. - (Topic 3) 

Which two of these statements are true of IPv6 address representation? (Choose two.) 

A. There are four types of IPv6 addresses: unicast, multicast, anycast, and broadcast. 

B. A single interface may be assigned multiple IPv6 addresses of any type. 

C. Every IPv6 interface contains at least one loopback address. 

D. The first 64 bits represent the dynamically created interface ID. 

E. Leading zeros in an IPv6 16 bit hexadecimal field are mandatory. 

Answer: B,C 


Q92. CORRECT TEXT - (Topic 7) 

A network associate is configuring a router for the weaver company to provide internet access. The ISP has provided the company six public IP addresses of 198.18.184.105 

198.18.184.110. The company has 14 hosts that need to access the internet simultaneously. The hosts in the company LAN have been assigned private space addresses in the range of 192.168.100.17 – 192.168.100.30. 

Answer: The company has 14 hosts that need to access the internet simultaneously but 

we just have 6 public IP addresses from 198.18.184.105 to 198.18.184.110/29. 

Therefore we have to use NAT overload (or PAT) 

Double click on the Weaver router to open it 

Router>enable Router#configure terminal 

First you should change the router's name to Weaver 

Router(config)#hostname Weaver 

Create a NAT pool of global addresses to be allocated with their netmask. 

Weaver(config)#ip nat pool mypool 198.18.184.105 198.18.184.110 netmask 255.255.255.248 

Create a standard access control list that permits the addresses that are to be translated 

Weaver(config)#access-list 1 permit 192.168.100.16 0.0.0.15 

Establish dynamic source translation, specifying the access list that was defined in the prior step 

Weaver(config)#ip nat inside source list 1 pool mypool overload 

This command translates all source addresses that pass access list 1, which means a source address from 192.168.100.17 to 192.168.100.30, into an address from the pool named mypool (the pool contains addresses from 

198.18.184.105 to 198.18.184.110) Overload keyword allows to map multiple IP addresses to a single registered IP address (many-to-one) by using different ports The question said that appropriate interfaces have been configured for NAT inside and NAT outside statements. This is how to configure the NAT inside and NAT outside, just for your understanding: 

Weaver(config)#interface fa0/0 Weaver(config-if)#ip nat inside Weaver(config-if)#exit Weaver(config)#interface s0/0 Weaver(config-if)#ip nat outside Weaver(config-if)#end 

Finally, we should save all your work with the following command: 

Weaver#copy running-config startup-config 

Check your configuration by going to "Host for testing" and type: 

C :\>ping 192.0.2.114 

The ping should work well and you will be replied from 192.0.2.114 


Q93. DRAG DROP - (Topic 7) 

Answer: 


Q94. - (Topic 9) 

Which two commands can you enter to verify that a configured NetFlow data export is operational? (Choose two.) 

A. show ip flow export 

B. show ip cache flow 

C. ip flow ingress 

D. ip flow egress 

E. interface ethernet 0/0 

F. ip flow-export destination 

Answer: A,B 


Q95. - (Topic 9) 

What is the effect of the overload keyword in a static NAT translation configuration? 

A. It enables port address translation. 

B. It enables the use of a secondary pool of IP addresses when the first pool is depleted. 

C. It enables the inside interface to receive traffic. 

D. It enables the outside interface to forward traffic. 

Answer: A 


Update ccna 200-120:

Q96. - (Topic 1) 

Host 1 is trying to communicate with Host 2. The e0 interface on Router C is down. 

Which of the following are true? (Choose two.) 

A. Router C will use ICMP to inform Host 1 that Host 2 cannot be reached. 

B. Router C will use ICMP to inform Router B that Host 2 cannot be reached. 

C. Router C will use ICMP to inform Host 1, Router A, and Router B that Host 2 cannot be reached. 

D. Router C will send a Destination Unreachable message type. 

E. Router C will send a Router Selection message type. 

F. Router C will send a Source Quench message type. 

Answer: A,D 


Q97. - (Topic 2) 

Three switches are connected to one another via trunk ports. Assuming the default switch configuration, which switch is elected as the root bridge for the spanning-tree instance of VLAN 1? 

A. the switch with the highest MAC address 

B. the switch with the lowest MAC address 

C. the switch with the highest IP address 

D. the switch with the lowest IP address 

Answer: B 


Q98. - (Topic 4) 

A Cisco router is booting and has just completed the POST process. It is now ready to find and load an IOS image. What function does the router perform next? 

A. It checks the configuration register. 

B. It attempts to boot from a TFTP server. 

C. It loads the first image file in flash memory. 

D. It inspects the configuration file in NVRAM for boot instructions. 

Answer: A 


Q99. - (Topic 6) 

Which statement about access lists that are applied to an interface is true? 

A. You can place as many access lists as you want on any interface. 

B. You can apply only one access list on any interface. 

C. You can configure one access list, per direction, per Layer 3 protocol. 

D. You can apply multiple access lists with the same protocol or in different directions. 

Answer: C 


Q100. - (Topic 7) 

Which protocol can cause overload on a CPU of a managed device? 

A. Netflow 

B. WCCP 

C. IP SLA 

D. SNMP 

Answer: D