★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions

Free Instant Download NEW NSE7 Exam Dumps (PDF & VCE):
Available on: https://www.certleader.com/NSE7-dumps.html


Listen closely for anyone who is interest in Fortinet as well as Fortinet certification as well as about to buy one. Finding in addition to choosing ratification. Some people may perhaps this step doesn?¡¥t matter at all, that is really mistaken. Only once you add an objective are you able to move ahead. Gauge your personal potential in addition to practical experience, and after that find the space amongst the very own potential right now and this necessary for the Fortinet NSE7 audit. * Analyze in addition to get ready. A person) Keep an eye textbooks earliest, since the e-book is a good professor. Besides, guides are form of low-priced in addition to practical. 3 . Two. Investigate Fortinet Troubleshooting Professional area regarding disscusion inside The idea discussion boards regardly as you possibly can, which you could talk about your practical experience in addition to wisdom with the Fortinet NSE7 testing in addition to different examinees. 3 . d) In case you have plenty of and cash, choosing a program is an effective decision. * 4¡ê?Try many on-line test. Yow will discover test concerns regarding NSE7 type readily. Accomplish more exercise routines and acquire experienced with the exam. 3 . Five, Surf Fortinet offical internet site regularly, the most recent press over the certification generally become posted presently there. In that case, sign up in addition to carry check-up. These days enrollment is extremely practical, and on the internet enrollment provides bocome the typical manner.

2021 Mar NSE7 test preparation

Q1. An LDAP user cannot authenticate against a FortiGate device. Examine the real time debug output shown in the exhibit when the user attempted the authentication; then answer thequestion below. 

Based on the output in the exhibit, what can cause this authentication problem? 

A. User student is not found in the LDAP server. 

B. User student is using a wrong password. 

C. The FortiGate has been configured with the wrongpassword for the LDAP administrator. 

D. The FortiGate has been configured with the wrong authentication schema. 

Answer: A 


Q2. What configuration changes can reduce the memory utilization in a FortiGate? (Choose two.) 

A. Reduce the session time to live. 

B. Increase the TCP session timers. 

C. Increase the FortiGuard cache time to live. 

D. Reduce the maximum file size to inspect. 

Answer: A,D


Q3. Examine the following partial outputs from two routing debug commands; then answer the question below. 

# get router info routing-table database 

s 0.0.0.0/0 [20/0] via 10.200.2.254, port2, [10/0] s *> 0.0.0.0/0 [10/0] via 10.200.1.254, port1 

# get router info routing-table all 

s* 0.0.0.0/0 [10/0] via 10.200.1.254, port1 

Why the default route using port2 is not displayed in the output of the second command? 

A. it has a lower priority than the default route using port1. 

B. it has a higher priority than the default route using portl. 

C. it has a higher distance than the default route using portl. 

D. it is disabled in the FortiGate configuration. 

Answer: A 


Q4. Examine the partial output from the IKE realtime debugshown in the exhibit; then answer the question below. 

Why didn't the tunnel come up? 

A. IKE mode configuration is not enabled in the remote IPsec gateway. 

B. The remote gateway's Phase-2 configuration does not match the local gateway's phase-2configuration. 

C. The remote gateway's Phase-1 configuration does not match the local gateway's phase-1 configuration. 

D. One IPsec gateway is using main mode, while the other IPsec gateway is using aggressive mode. 

Answer: B 


Q5. Examine the following routing table and BGP configuration; then answer the question below. 

TheBGP connection is up, but the local peer is NOT advertisingthe prefix 192.168.1.0/24. Which configuration change will make the local peer advertise this prefix? 

A. Enable the redistribution of connected routers into BGP. 

B. Enable the redistribution of static routers into BGP. 

C. Disable the setting network-import-check. 

D. Enable the setting ebgp-multipath. 

Answer: C 


Most recent NSE7 pdf exam:

Q6. An administrator added the following Ipsec VPN to a FortiGate configuration: 

configvpn ipsec phasel -interface 

edit "RemoteSite" 

set type dynamic 

set interface "portl" 

set mode main 

set psksecret ENC LCVkCiK2E2PhVUzZe 

next 

end 

config vpn ipsec phase2-interface 

edit "RemoteSite" 

set phasel name "RemoteSite" 

set proposal 3des-sha256 

next 

end 

However, the phase 1 negotiation is failing. The administrator executed the IKF real time debug while attempting the Ipsec connection. The output is shown in the exhibit. 

What is causing the IPsec problem in the phase 1 ? 

A. The incoming IPsec connection is matching the wrong VPN configuration 

B. The phrase-1 mode must be changed to aggressive 

C. The pre-shared key is wrong 

D. NAT-T settings do not match 

Answer: C 


Q7. Examine the following routing table and BGP configuration; then answer the question below. 

TheBGP connection is up, but the local peer is NOT advertisingthe prefix 192.168.1.0/24. Which configuration change will make the local peer advertise this prefix? 

A. Enable the redistribution of connected routers into BGP. 

B. Enable the redistribution of static routers into BGP. 

C. Disable the setting network-import-check. 

D. Enable the setting ebgp-multipath. 

Answer: C 


Q8. Examine the output of the 'get router info ospf interface' command shown in the exhibit; then answer the question below. 

Which statements are true regarding the above output? (Choose two.) 

A. Theport4 interface is connected to the OSPF backbone area. 

B. The local FortiGate has been elected as the OSPF backup designated router 

C. There are at least 5 OSPF routers connected to the port4 network. 

D. Two OSPF routers are down in the port4 network. 

Answer: A,D 


Q9. Examine the IPsec configuration shown in the exhibit; then answer the question below. 

An administrator wants to monitor the VPN byenable the IKE real time debug using these commands: 

diagnose vpn ike log-filter src-addr4 10.0.10.1 diagnose debug application ike -1 diagnose debug enable 

The VPN is currently up, there is no traffic crossing the tunnel and DPD packets are being interchanged between both Ipsec gateways. However, the IKE rea time debug does NOT show any output. Why isn't there any output? 

A. The IKE real time debug shows the phases 1 and 2 negotiations only. It does not show any more output once the tunnel is up. 

B. The log-filter setting is set incorrectly. The VPN's traffic does not match this filter. 

C. The IKF real time debug shows the phase 1 negotiation only. For information after that, the administrator must use the IPsec real time debug instead: diagnosedebug application ipsec -1 

D. The IKE real time debug shows error messages only. If it does not provide any output, it indicates that the tunnel is operating normally. 

Answer: A 


Q10. Examine the output from the 'diagnose debug authd fsso list' command; then answer the question below. 

# diagnose debug authd fsso list—FSSO logons-IP: 192.168.3.1 User: STUDENT Groups:TRAININGAD/USERS Workstation: INTERNAL2. TRAINING. LAB The IP address 192.168.3.1 is NOT the one used by the workstation INTERNAL2. TRAINING. LAB. 

What should the administrator check? 

A. The IP address recorded in the logon event for the user STUDENT. 

B. The DNS name resolution for the workstation name INTERNAL2. TRAINING. LAB. 

C. The source IP address of the traffic arriving to the FortiGate from the workstation INTERNAL2. TRAINING. LAB. 

D. The reserve DNS lookup forthe IP address 192.168.3.1. 

Answer: C