All About Real NS0-184 Vce

NEW QUESTION 1
Click the Exhibit button.

Which set of components on a FAS9000 are highlighted in the exhibit?

• A. FCVI-Module, Controller, Serial-Port, FlashCache-Module
• B. SAS-Module, Controller, USB-Port, FlashCache-Module
• C. NVRAM-Module, Controller, Serial-Port, FlashCache-Module
• D. Powersupply, Controller, USB-Port, NVRAM-Module

Answer: A

NEW QUESTION 2
After the installation of a new ONTAP 9.8 cluster, you have to verify if AutoSupport works.
In this scenario, which two commands would you use to accomplish this task? (Choose two.)

• A. system node autosupport history show
• B. system node autosupport check show
• C. system node autosupport destination show
• D. system node autosupport invoke

Answer: AB

NEW QUESTION 3
After moving a new AFF A400 cluster into production, the administrator notices error events in ONTAP
System Manager regarding SAS HA issues.
In this scenario, which NetApp tool would have identified these errors after the installation process?

• A. Cloud Manager
• B. ONTAP System Manager
• C. Active IQ Config Advisor
• D. Active IQ Unified Manager

Answer: B

NEW QUESTION 4
Click the Exhibit button.

Referring to the exhibit, you installed a new AFF A250 HA system with FC at a customer site. The
customer asks how many ports can be used for the Ethernet host connections.
In this scenario, what would you tell the customer?

• A. 4
• B. 8
• C. 10
• D. 12

Answer: D

NEW QUESTION 5
You are expanding an existing 4-node ONTAP 9.8 cluster with a FAS8300 HA pair by adding a new FAS500f HA pair. Before the expansion, you are asked to save the configuration of the cluster to a backup file.
In this scenario, which two ONTAP configuration backup methods are available? (Choose two.)

• A. storage VM
• B. node
• C. cluster
• D. switch

Answer: AC

Explanation:
Reference: https://docs.netapp.com/us-en/ontap-whatsnew/pdfs/fullsitesidebar/TR_4894NetApp_ONTAP_9_9_1_Feature_Overview.pdf

NEW QUESTION 6
A customer requires encryption at rest on every node root volume.
In this scenario, which two encryption solutions will fulfill this requirement? (Choose two.)

• A. NSE
• B. NAE
• C. IPsec
• D. NVE

Answer: BD

Explanation:
Reference: https://docs.netapp.com/us-en/ontap/encryption-at-rest/configure-netapp-volumeencryptionconcept.
html#aggregate-level-encryption

NEW QUESTION 7
You are preparing to physically install a new AFF A400 cluster into a customer’ sracks. All equipment
Has been delivered to the customer’s site.
Which three tools do you need to complete this installation? (Choose three.)

• A. additional network cables
• B. Phillips #2 screwdriver
• C. laptop computer
• D. slide railkit
• E. cable management tray

Answer: ABC

Explanation:
Reference: https://docs.netapp.com/us-en/ontap-systems/a400/install-detailed-guide.html#step-1-
prepare-for-installation

NEW QUESTION 8
You have a new 2-node FAS8700 ONTAP 9.8 cluster. One of the nodes has 24x16 TB NL-SAS disks
assigned and available for a new aggregate. You created the aggregate with one RAID group and two spare disks.
In this scenario, how many data drives are in the aggregate?

• A. 20
• B. 18
• C. 17
• D. 19

Answer: A

NEW QUESTION 9
Upon finishing the Installation of a new system for a customer, they request that you train them on how to administer the system. In this scenario, which two responses are appropriate? (Choose two.)

• A. Visit the NetApp MySupport Site and look for the Express Guides, they will guide you through the dailytasks and provide input and output examples.
• B. If you have a specific issue, you can visit the Knowledge Base Web site (https://kb.netapp,com).
• C. The answers to any of your questions can be found on the NetApp SmartSolve site(http://smartsolve.netapp.com).
• D. You should open a case with NetApp Support for all future questions with low priority and include thekeyword "Training" in the title.

Answer: AC

NEW QUESTION 10
You want to enable secure communication with the SP or BMC through CA-signed certificates.
Which two certificate types must be installed in this scenario? (Choose two.)

• A. cluster certificate
• B. server certificate
• C. root CA certificate
• D. ONTAP certificate

Answer: BC

Explanation:
Reference:
https://kb.netapp.com/Advice_and_Troubleshooting/Data_Storage_Software/ONTAP_OS/How_to_c
onfigure_communication_between_ONTAP_and_Service_Processor_(SP)_or_BMC_with_Certificate_
Authority_(CA)_signed_certificates

NEW QUESTION 11
What is a benefit of ONTAP System Manager?

• A. System Manager provides simplified management of service processor tasks.
• B. System Manager easily configures and provisions storage.
• C. System Manager easily configures and provisions StorageGRID.
• D. System Manager provides simplified management of E-Series.

Answer: B

NEW QUESTION 12
After adding two nodes to an FC-enabled cluster, the storage administrator wants to ensure that existing LUNs can use paths on the new nodes.
What is required to complete this task?

• A. Use the storage port rescan command.
• B. Use the lun mapping add-reporting-nodes command.
• C. Use the lun bind create command.
• D. Rescan the bus on the hosts by using the rescan-scsi-bus.sh script.

Answer: AB

NEW QUESTION 13
Click the Exhibit button.

What are two functions of the four Ethernet switches in the supported configuration that is shown in the exhibit? (Choose two.)

• A. to provide a direct connection for the SnapMirror Synchronous (SM-S)
• B. to install cross-site cluster management switches
• C. to provide connectivity for NVRAM over iWARP
• D. to enable SyncMirror replication

Answer: AC

NEW QUESTION 14
You are preparing to add a 2-node AFF A250 system to an existing 4-node AFF A800 cluster with Cisco
Nexus 3232C switches. The cluster switches are currently running the Cluster-HA RCF.
In this scenario, which two steps are required to install the AFF A250 system? (Choose two.)

• A. Load the Storage RCF.
• B. Cable the AFF A250 nodes to the next free ports on the switch.
• C. Cable the AFF A250 nodes to the breakout ports on the switch.
• D. Load the Cluster-HA-Breakout RCF.

Answer: CD

NEW QUESTION 15
Which two switch operating system are supported on ONTAP cluster switches? (Choose two.)

• A. Brocade FOS
• B. Cisco NX-OS
• C. CiscoIOS
• D. Broadcom EFOS

Answer: BD

Explanation:
Reference: https://docs.netapp.com/us-en/ontap-systems-switches/pdfs/fullsitesidebar/AFF_and_FAS_Switch_Documentation.pdf

NEW QUESTION 16
You are preparing for the installation of a new ONTAP 9.8 cluster and need to get the
preinstallation information from the customer.
In this scenario, which NetApp tool would you use to create a configuration spreadsheet template for
the deployment?

• A. ConfigBuilder
• B. Interoperability Matrix Tool
• C. Active IQ Config Advisor
• D. Active IQ Unified Manager

Answer: B

Explanation:
Reference: https://docs.netapp.com/us-en/ontap-select/pdfs/fullsitesidebar/ONTAP_Select_documentation.pdf

NEW QUESTION 17
You have added two new AFF A250 nodes to an existing 4-node cluster with NetApp CN1610 cluster
Network switches. Although the nodes can join the cluster, the storage failover show command output shows that the NVRAM log is not synchronized, and it cannot reach the partner over an HA interconnect.
In this scenario, which two statements are true? (Choose two.)

• A. The AFF A250 requires switches with 40GbE port support.
• B. The AFF A250 uses different ports for the cluster and the HA interconnect.
• C. The AFF A250 requires switches with 25GbE port support.
• D. The AFF A250 uses the same port for the cluster and the HA interconnect.

Answer: BC

NEW QUESTION 18
You are adding new controllers to an existing cluster. As part of the upgrade process, you have updated
the BES-53248 cluster switches. In this scenario.
Which two commands would you use to verify a healthy cluster after the upgrade? (Choose two.)

• A. network port show -ipspace Cluster
• B. network interface show -vserver Cluster
• C. network device-discovery show -protocol cdp
• D. network interface show -vserver Cluster -fields auto-revert

Answer: AB

NEW QUESTION 19
Data ONTAP 9 supports which three features? (Choose three.)

• A. SMB 3.0
• B. NFSv2
• C. SnapMirror
• D. Infinite Volumes

Answer: ACD

NEW QUESTION 20
......