★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions

Free Instant Download NEW JN0-633 Exam Dumps (PDF & VCE):
Available on: https://www.certleader.com/JN0-633-dumps.html


Cause all that matters here is passing the Juniper JN0-633 exam. Cause all that you need is a high score of JN0-633 Security, Professional (JNCIP-SEC) exam. The only one thing you need to do is downloading Ucertify JN0-633 exam study guides now. We will not let you down with our money-back guarantee.

Q1. How does the SRX5800, in transparent mode, signal failover to the connected switches?

A. It initiates spanning-tree BPDUs.

B. It sends out gratuitous ARPs.

C. It flaps the impaired interfaces.

D. It uses an IP address monitoring configuration.

Answer: B


Q2. What are three advantages of group VPNs? (Choose three.)

A. Supports any-to-any member connectivity.

B. Provides redundancy with cooperative key servers.

C. Eliminates the need for full mesh VPNs.

D. Supports translating private to public IP addresses.

E. Preserves original IP source and destination addresses.

Answer: A,C,E

Explanation:

Reference :http://www.thomas-krenn.com/redx/tools/mb_download.php/mid.x6d7672335147784949386f3d/Manual_Confi guring_Group_VPN_Juniper_SRX.pdf


Q3. You are asked to merge the corporate network with the network from a recently acquired company. Both networks use the same private IPv4 address space (172.25.126.0/24). An SRX device serves as the gateway for each network.Which solution allows you to merge the two networks without adjusting the current address assignments?

A. source NAT

B. persistent NAT

C. double NAT

D. NAT444

Answer: C

Explanation:

Reference :http://class10e.com/juniper/what-should-you-do-to-meet-the-requirements/


Q4. Which statement is true about Layer 2 zones when implementing transparent mode security?

A. All interfaces in the zone must be configured with the protocol family mpls.

B. All interfaces in the zone must be configured with the protocol family inet.

C. All interfaces in the zone must be configured with the protocol family bridge.

D. All interfaces in the zone must be configured with the protocol family inet6.

Answer: C

Explanation:

Reference (page no 12) http://www.juniper.net/techpubs/en_US/junos12.1x44/information-products/pathway-pages/security/security-layer2-bridging-transparent-mode.pdf


Q5. You are asked to implement an IPsec VPN between your main office and a new remote office. The remote office receives its IKE gateway address from their ISP dynamically.

Regarding this scenario, which statement is correct?

A. Configure a fully qualified domain name (FQDN) as the IKE identity.

B. Configure the dynamic-host-address option as the IKE identity.

C. Configure the unnumbered option as the IKE identity.

D. Configure a dynamic host configuration name (DHCN) as the IKE identity.

Answer: A


Q6. You are asked to allow access to an external application for an internal host subject to address translation. The application requires multiple sessions initiated from the internal host and expects all the sessions to originate from the same source IP address.

Which Junos feature meets this objective?

A. destination NAT with address persistence

B. source NAT with address persistence

C. static NAT with port translation

D. interface-based persistent NAT

Answer: B


Q7. Given the following session output:

Session ID., Policy namE.default-policy-00/2, StatE.Active, Timeout: 1794, Valid

In: 2001:660:1000:8c00::b/1053 --> 2001:660:1000:9002::aafe/80;tcp, IF.reth0.0, Pkts: 4,

Bytes: 574

Out: 192.168.203.10/80 --> 192.168.203.1/24770;tcp, IF.reth1.0, Pkts: 3, Bytes:

Which statement is correct about the security flow session output?

A. This session is about to expire.

B. NAT64 is used.

C. Proxy NDP is used for this session.

D. The IPv4 Web server runs services on TCP port 24770.

Answer: B

Explanation:

Reference :http://kb.juniper.net/InfoCenter/index?page=content&id=KB22391


Q8. An external host is attacking your network. The host sends an HTTP request to a Web server, but does not include the version of HTTP in the request.

Which type of attack is being performed?

A. signature-based attack

B. application identification

C. anomaly

D. fingerprinting

Answer: C

Explanation: Reference;https://services.netscreen.com/restricted/sigupdates/nsm-updates/HTML/HTTP%3AINVALID%3AMSNG-HTTP-VER.html


Q9. Click the Exhibit button.

user@host> show interfaces routing-instance all ge* terse InterfaceAdmin Link Proto LocalInstance

ge-0/0/0.0 up up inet 172.16.12.205/24 default ge-0/0/1.0 up up inet 5.0.0.5/24

iso A

ge-0/0/2.0 up up inet 25.0.0.5/24 iso B

user@host> show security flow session

Session ID: 82274, Policy name: default-policy-00/2, Timeout: 1770, Valid In: 5.0.0.25/61935 --> 25.0.0.25/23;tcp, If: ge-0/0/1.0, Pkts: 31, Bytes: 1781 Out: 25.0.0.25/23 --> 5.0.0.25/61935;tcp, If: ge-0/0/2.0, Pkts: 23, Bytes: 1452

Total sessions: 3 user@host> show route

inet.0: 4 destinations, 4 routes (4 active, 0 holddown, 0 hidden)

+ = Active Route, - = Last Active, + = Both

0.0.0.0/0 *[Static/5] 04:08:52

> to 172.16.12.1 via ge-0/0/0.0 172.16.12.0/24 *[Direct/0] 04:08:52

via ge-0/0/0.0

172.16.12.205/32 *[Local/0] 4w4d 23:04:29

Loca1 via ge-0/0/0.0

224.0.0.5/32 *[OSPF/10] 14:37:35, metric 1

MultiRecv

A. inet.0: 4 destinations, 4 routes {4 active, 0 holddown, 0 hidden)

+ = Active Route, - = Last Active, * = Both 5.0.0.0/24 5 *[Direct/0] 00:05:04

> via ge-0/0/1.0

5.0.0.5/32 *[Local/0] 00:05:04

Local via ge-0/0/1.0 25.0.0.0/24 *[Direct/0] 00:02:37

> via ge-0/0/2.0

B. inet.0: 3 destinations, 3 routes (3 active, 0 holddown, 0 hidden)

+ = Active Route, - = Last Active, * = Both 5.0.0.25/32 *[Static/5] 00:02:38

to table A.inet.0

25.0.0.0/24 *[Direct/0] 00:02:37

> via ge-0/0/2.0

25.0.0.5/32 *[Local/0] 00:02:37

Local via ge-0/0/2.0

Which statement is true about the outputs shown in the exhibit?

C. The routing instances A and B are connected using anltinterface.

D. Routing instance A’s routes are shared with routing instance B.

E. Routing instance B’s routes are shared with routing instance A.

F. The routing instances A and B are connected using avtinterface.

Answer: C


Q10. Click the Exhibit button.

-- Exhibit–

-- Exhibit --

In the exhibit, the SRX device has hosts connected to interface ge-0/0/1 and ge-0/0/6. The devices are not able to ping each other.What is causing this behavior?

A. The interfaces must be in trunk mode.

B. The interfaces need to be configured for Ethernet switching.

C. The default security policy does not apply to transparent mode.

D. A bridge domain has not been defined.

Answer: D