A Review Of Free DES-6322 Actual Exam

NEW QUESTION 1
What is a valid 2-node VxRail cluster configuration?

• A. 2x 10 GbE and 2x 25 GbE in a switch configuration and external vCenter
• B. 2x 1 GbE and 2x 10 GbE in a direct-connect configuration and external vCenter
• C. 2x 1 GbE and 2x 10 GbE in a switch configuration and internal vCenter
• D. 2x 10 GbE and 2x 25 GbE in a direct-connect configuration and internal vCenter

Answer: B

NEW QUESTION 2
What is a consideration when performing a VxRail software upgrade from version 4.7.xxx to version 7.0.xxx?

• A. External vCenter server must be upgraded after the VxRail is upgraded
• B. vCenter Server requires a temporary IP address on a different subnet before the upgrade
• C. Secure boot must be enabled on the ESXi hosts for a successful upgrade
• D. VxRail Manager VM must be changed to the default name to avoid an upgrade failure

Answer: A

NEW QUESTION 3
Which vCenter object is created automatically when deploying VxRail with an external vCenter Server?

• A. Resource Pool
• B. Cluster
• C. Datacenter
• D. VxRail Management user account

Answer: B

NEW QUESTION 4
Which VxRail model can only be installed with static rack rails?

• A. D Series
• B. P Series
• C. S Series
• D. G Series

Answer: A

NEW QUESTION 5
An implementation engineer is tasked with setting up RecoverPoint for VMs on a single G Series chassis. How many VMs are licensed to be protected on the cluster?

• A. 5
• B. 10
• C. 15
• D. 20

Answer: C

NEW QUESTION 6
An implementation engineer is deploying a VxRail cluster with the VxRail Deployment Wizard Which user accounts must be defined for VxRail Manager?

• A. VxRail Manager root account vCenter service account
• B. VxRail Manager root account VxRail Manager service account
• C. VxRail Manager service account vCenter service account
• D. vCenter root accountVxRail Manager service account

Answer: B

NEW QUESTION 7
An implementation engineer is tasked with setting up RecoverPoint for VMs on a new 4-node E Series VxRail duster How many VMs are licensed to be protected on the cluster?

• A. 5
• B. 10
• C. 20
• D. 25

Answer: C

NEW QUESTION 8
What is a difference between vSAN Data-In-Transit Encryption and vSAN Data-At-Rest-Encryption?

• A. Data-In-Transit Encryption: Encrypts traffic between VMs and the VxRail nodes Data-At-Rest Encryption: Encrypts traffic between VxRail nodes only
• B. Data-In-Transit Encryption: Does not require a Key Management Server Data-At-Rest Encryption: Requires a Key Management Server
• C. Data-In-Transit Encryption: Key Management Server must reside on the vSAN cluster Data-At-Rest Encryption: Key Management Server can reside on the vSAN cluster
• D. Data-In-Transit Encryption: Addresses fear of media theftData-At-Rest Encryption: Addresses fear of rogue administrators

Answer: A

NEW QUESTION 9
What is the maximum number of supported nodes for a VxRail cluster running on a 1 GbE network?

• A. 4
• B. 5
• C. 16
• D. 32

Answer: C

NEW QUESTION 10
What is the recommended format for host names when using the VxRail Deployment Wizard for an External vCenter solution?

• A. FQDN for vCenter ServerHost name for VxRail Manager
• B. Host name for both vCenter Server and for VxRail Manager
• C. FQDN for both vCenter Server and for VxRail Manager
• D. Host name for vCenter Server FQDN for VxRail Manager

Answer: A

NEW QUESTION 11
According to Dell best practices, which VxRail series can be deployed in either datacenters or remote locations?

• A. D Series
• B. V Series
• C. G Series
• D. E Series

Answer: D

NEW QUESTION 12
A systems engineer needs to ensure that the VxRail system is healthy and any issues found are addressed prior to starting an upgrade process. Where in the vSphere Client can they review alarms and overall vSAN health?

• A. Triggered Alarms > Issues and Alarms > All issues Triggered Alarams > vSAN > Skyline Health
• B. Monitor > All Issues > Issues and Alarms Monitor > vSAN > Health
• C. Triggered Alarms > All Issues > Issues and Alarms Triggered Alarms > vSAN > Health
• D. Monitor > Issues and Alarms > All issues Monitor > vSAN > Skyline Health

Answer: B

NEW QUESTION 13
What is validated by running the Proactive Network Performance test in vCenter on a VxRail cluster?

• A. Latency and bandwidth measurement to the witness host
• B. Network configuration and performance for vSAN
• C. Network performance for virtual machines
• D. Latency measurement between DCs for Stretched Clusters

Answer: A

NEW QUESTION 14
A systems engineer is deploying a VxRail cluster. They want to ensure that configuration issues can be avoided when expanding this cluster.
Which actions need to be performed?

• A. Verify VxRail nodes are racked and connected to the ToR switches Validate the network environment
• B. Validate that no pending and unfinished jobs are running on the servers Verify that the server and storage components are working properly
• C. Validate that the latest updates and patches are installed in the system Validate that no pending and unfinished jobs are running on the servers
• D. Verify the configuration settings initially captured in PEQ Validate the storage environment

Answer: C

NEW QUESTION 15
Once a VxRail cluster has been acquired, what is the correct sequence of steps to deploy it?

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 16
What is a consideration when expanding a VxRail cluster? (Choose two.)

• A. Mixing of All-Flash and all-NVMe nodes in a cluster is not allowed
• B. Expanding a cluster to 64 nodes requires a 25 GbE network
• C. G Series clusters can be expanded only with G Series nodes
• D. 1 GbE must be hybrid and single processor node type

Answer: BC

NEW QUESTION 17
An implementation engineer is deploying a new VxRail cluster. What should they confirm before installing the hardware?

• A. Service laptop must be on the same IP network as the iDRACs
• B. At least 36 in (92 cm) clearance exists in front of and behind the cabinet
• C. Power distribution must support the power rating of a single node
• D. Single power zone must be used with adequate power cables

Answer: C

NEW QUESTION 18
What are the requirements for a customer-supplied VDS in a VxRail deployment?

• A. 4 or 8 uplinksPort groups for Discovery, Management, vMotion, and vSAN only
• B. 2 or 4 uplinksPort groups for Discovery, Management, vMotion, and vSAN only
• C. 2 or 4 uplinksPort groups for Discovery, Management vCenter Server, vMotion, and vSAN
• D. 4 or 8 uplinksPort groups for Discovery, Management, vCenter Server, vMotion, and vSAN

Answer: D

NEW QUESTION 19
From what location should NVT for VxRail be run?

• A. Jump server on a different network
• B. Workstation on the same network as VxRail Manager
• C. VxRail network Top of Rack switch
• D. Laptop connected to the first VxRail ESXi node

Answer: B

NEW QUESTION 20
......