★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions
Free Instant Download NEW 70-680 Exam Dumps (PDF & VCE):
Available on:
https://www.certleader.com/70-680-dumps.html
It will likely be fantastic whenever individuals bring 70-680 education directly from Microsoft College or university. Candidates can grow in experience and knowledge with Microsoft University since masters/ experts will supply education to your individuals. Before taking Microsoft 70-680 analysis, a principal factor that the individuals need to do is to know about the 70-680 assessment training and that will encourage them to for the obvious knowledge in learning a 70-680 course. Many of the 70-680 assessment info together with other details are offered immediately inside the Microsoft internet site.
2021 Mar 70-680 vce
Q241. - (Topic 4)
You have a netbook computer that runs Windows 7. The computer has a single 30-GB partition that has 10 GB of free space. You need to create a system image of the computer by using Windows Backup.
You must achieve this goal by using the minimum amount of time. What should you do first?
A. Attach an external hard disk.
B. Attach an external DVD burner.
C. Convert the local hard disk to a GPT disk.
D. Create and attach a virtual hard drive (VHD).
Answer: A
Explanation:
Scheduling Backups with the Backup And Restore Console Windows 7 Backup uses shadow copies to take a snapshot of your files, allowing the backup to completely back up files even if they are open. Backups are configured and scheduled by using the Backup And Restore console under System And Security in Control Panel. You can select the following types of backup destination: An external hard driveExternal hard drives are more expensive to purchase than internal hard drives, although you need to balance this against the cost of fitting the internal drive. They can be removed and stored in a secure location. However, they are typically slower than internal hard drives and tend to be less reliable, mainly because they are by default formatted using FAT rather than NTFS. You cannot use an external hard drive for a System Image backup unless you convert its filing system to NTFS. Because it is easily removable, it is more likely that an external hard drive will be missing when a scheduled backup is required.
Q242. - (Topic 2)
You have a customized image of Windows 7 Professional.
You need to create a new unattended file to automate the deployment of the image. You must achieve this goal by using the minimum amount of administrative effort.
What should you do first?
A. Run Imagex.exe and specify the /mount parameter.
B. Run Dism.exe and specify the /mount-WIM parameter.
C. From Microsoft Deployment Toolkit (MDT), add the custom Windows image (WIM).
D. From Windows System Image Manager (Windows SIM), open the custom Windows image (WIM).
Answer: D
Explanation:
Windows SIMOpens Windows images, creates answer files, and manages distribution shares and configuration sets.NOT DismDeployment Image Servicing and Management (DISM) is a command-line tool used to service Windows. images offline before deployment. You can use it to install, uninstall, configure, and update Windows features, packages, drivers, and international settings. Subsets of the DISM servicing commands are also available for servicing a running operating system.NOT ImagexImageX is a command-line tool that enables original equipment manufacturers (OEMs) and corporations to capture, to modify, and to apply file-based disk images for rapid deployment. ImageX works with Windows image (.wim) files for copying to a network, or it can work with other technologies that use .wim images, such as Windows Setup, Windows Deployment Services (Windows DS), and the System Management Server (SMS) Operating System Feature Deployment Pack./mountMounts a .wim file from Windows XP with Service Pack 2 (SP2), Windows Server 2003 with Service Pack 1 (SP1), or Windows Vista with read-only permission to a specified directory. Once the file is mounted, you may view, but not modify, all the information contained in the directory.NOT MDT MDT 2010 is the Microsoft solution accelerator for operating system and application deployment and offers flexible driver management, optimized transaction processing, and access to distribution shares from any location. You can use the MDT on imaging and deployment servers to implement the automatic deployment of Windows 7 (for example) on client computers. It is possible to run MDT 2010 on a client running Windows 7, but in practice it would typically run from a distribution server running Windows Server 2008. The MDT provides detailed guidance and job aids and offers a common deployment console that contains unified tools and processes that you can use for client and server deployment. The toolkit offers standardized desktop and server images, along with improved security and ongoing configuration management.
Q243. - (Topic 1)
Your network consists of a single IPv4 subnet. The subnet contains 20 computers that run Windows 7.
You add a new computer named Computer1 to the subnet.
You discover that Computer1 has an IP address of 169.254.34.12.
You cannot connect to other computers on the network. Other computers on the network can connect to each other.
You need to ensure that you can connect to all computers on the network. What should you do?
A. Turn off Windows Firewall.
B. Run Ipconfig.exe /renew.
C. Configure a static TCP/IP address.
D. Run Netsh.exe interface ipv4 install.
Answer: C
Explanation:
[Need better justification] Configuring static IP addresses When you assign a static IP address, you need to tell the computer the IP address you want to use, the subnet mask for this IP address, and, if necessary, the default gateway to use for internetwork communications. An IP address is a numeric identifier for a computer. Ip addressing schemes vary according to how your network is configured, but they're normally assigned based on a particular network segment.
Q244. - (Topic 1)
You manage a computer that runs Windows 7.
You are tasked to identify which applications were installed during the last week.
What Windows component would you use to find this information? Choose two.
A. Check the Windows System Change Log in the Control Panel.
B. View the events in the Applications Log under Windows Logs in the System and Security component section of the Control Panel.
C. The informational events should be reviewed from Reliability Monitor.
D. Check the Windows System Diagnostics Report under the Performance Monitor MMC.
Answer: B,C
Q245. - (Topic 6)
You have an answer file named Unattend.xml for a Windows 7 automated installation. You need to perform an unattended installation of Windows 7 by using the answer file. What should you do?
A. Name the answer file as unattend.xml and save it to a floppy disk. Start the computer from the Windows Preinstallation Environment (WinPE).
B. Name the answer file as unattend.xml and save it to a USB disk. Start the computer from the Windows Preinstallation Environment (WinPE).
C. Name the answer file as autounattend.xml and save it to a floppy disk. Start the computer from the Windows 7 DVD.
D. Name the answer file as unattend.txt and save it to a USB disk. Start the computer from the Windows Preinstallation Environment (WinPE).
Answer: C
Improved 70-680 free exam:
Q246. - (Topic 1)
You have a standalone computer that runs Windows 7. Multiple users share the computer.
You need to ensure that you can read the content of all encrypted files on the computer.
What should you do?
A. Run the Certificates Enrollment wizard and then run Certutil.exe -importpfx.
B. Run the Certificates Enrollment wizard and then run Certutil.exe -installcert.
C. Run Cipher.exe /r and then add a data recovery agent from the local security policy.
D. Run Cipher.exe /rekey and then import a security template from the local security policy.
Answer: C
Explanation:
Cipher Displays or alters the encryption of folders and files on NTFS volumes. Used without parameters, cipher displays the encryption state of the current folder and any files it contains. Administrators can use Cipher.exe to encrypt and decrypt data on drives that use the NTFS file system and to view the encryption status of files and folders from a command prompt. The updated version adds another security option. This new option is the ability to overwrite data that you have deleted so that it cannot be recovered and accessed.When you delete files or folders, the data is not initially removed from the hard disk. Instead, the space on the disk that was occupied by the deleted data is "deallocated." After it is deallocated, the space is available for use when new data is written to the disk. Until the space is overwritten, it is possible to recover the deleted data by using a low-level disk editor or data-recovery software.
If you create files in plain text and then encrypt them, Encrypting File System (EFS) makes a backup copy of the file so that, if an error occurs during the encryption process, the data is not lost. After the encryption is complete, the backup copy is deleted. As with other deleted files, the data is not completely removed until it has been overwritten. The new version of the Cipher utility is designed to prevent unauthorized recovery of such data.
/K Creates a new certificate and key for use with EFS. If this option is chosen, all the other options will be ignored. By default, /k creates a certificate and key that conform to current group plicy. If ECC is specified, a self-signed certificate will be created with the supplied key size. /R Generates an EFS recovery key and certificate, then writes them to a .PFX file (containing certificate and private key) and a .CER file (containing only the certificate). An administrator may add the contents of the .CER to the EFS recovery policy to create the recovery for users, and import the .PFX to recover individual files. If SMARTCARD is specified, then writes the recovery key and certificate to a smart card. A .CER file is generated (containing only the certificate). No .PFX file is genereated. By default, /R creates an 2048-bit RSA recovery key and certificate. If EECC is specified, it must be followed by a key size of 356, 384, or 521.
Q247. - (Topic 2)
You have a computer that runs Windows Vista.
You install Windows 7 on a new partition on the computer.
You need to ensure that the computer always starts Windows Vista by default.
What should you do?
A. Run Bcdedit.exe and specify the /default parameter.
B. Run Bcdedit.exe and specify the /bootems parameter.
C. Create a boot.ini file in the root of the Windows 7 partition.
D. Create a boot.ini file in the root of the Windows Vista partition.
Answer: A
Explanation:
The Bcdedit.exe utility allows you to manage boot configuration./default - Sets the default entry that the boot manager willl use./bootems - Enable or disables Emergency Management Services for a boot application.NOT boot.ini:Windows (specifically Ntldr) uses
Q248. - (Topic 2)
You are preparing a custom Windows 7 image for deployment.
You need to install a third-party network interface card (NIC) driver in the image.
What should you do?
A. Run Pkgmgr.exe and specify the /ip parameter.
B. Run Dism.exe and specify the /add-driver parameter.
C. Create a new answer file by using Windows System Image Manager (Windows SIM). Run Pkgmgr.exe and specify the /n parameter.
D. Create a new answer file by using Windows System Image Manager (Windows SIM). Run Dism.exe and specify the /apply-unattend parameter.
Answer: B
Explanation:
Dism Deployment Image Servicing and Management (DISM) is a command-line tool used to service Windows. images offline before deployment. You can use it to install, uninstall, configure, and update Windows features, packages, drivers, and international settings. Subsets of the DISM servicing commands are also available for servicing a running operating system. Windows 7 introduces the DISM command-line tool. You can use DISM to service a Windows image or to prepare a Windows PE image. DISM replaces Package Manager (Pkgmgr.exe), PEimg, and Intlcfg in Windows Vista, and includes new features to improve the experience for offline servicing. You can use DISM to perform the following actions:
-Prepare a Windows PE image.- Enable or disable Windows features within an image.-Upgrade a Windows image to a different edition.- Add, remove, and enumerate packages.-Add, remove, and enumerate drivers.- Apply changes based on the offline servicing section of an unattended answer file.- Configure international settings.- Implement powerful logging features.- Service operating systems such as Windows Vista with SP1 and Windows Server 2008.- Service a 32-bit image from a 64-bit host and service a 64-bit image from a 32-bit host.- Service all platforms (32-bit, 64-bit, and Itanium).- Use existing Package Manager scripts.
Q249. HOTSPOT - (Topic 4)
You administer a computer that has Windows 7 Enterprise installed.
The computer has an application that must run by using administrative permission.
A user who has a standard user account connects to the computer by using a Remote Desktop connection. The user right-clicks the application shortcut, but the run as administrator option is unavailable.
You need to ensure that the user is able to run the application by using administrative permissions.
Which services should you configure? (To answer, select the appropriate option or options in the answer area).
Answer:
Q250. HOTSPOT - (Topic 6)
You have a windows 7 computer connected to a local subnet.
From the command prompt, you ping an IP address on the local network, but you get no response.
You need to configure your computer to ping the IP address.
Which two fields of TCF/IPV4 Properties should you configure? (To answer, select the appropriate two fields in the TCP/IPv4 Properties in the answer area.)
Answer: