★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions
Free Instant Download NEW 70-483 Exam Dumps (PDF & VCE):
Available on:
https://www.certleader.com/70-483-dumps.html
Simulation of 70 483 certification practice exam materials and training tools for Microsoft certification for client, Real Success Guaranteed with Updated exam 70 483 programming in c# pdf dumps vce Materials. 100% PASS Programming in C# exam Today!
Q41. - (Topic 2)
You are implementing a new method named ProcessData. The ProcessData() method calls a third-party component that performs a long-running operation to retrieve stock information from a web service.
The third-party component uses the IAsyncResult pattern to signal completion of the long-running operation so that the UI can be updated with the new values.
You need to ensure that the calling code handles the long-running operation as a System.Threading.Tasks.Task object to avoid blocking the UI thread.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Create a TaskCompletionSource<T> object.
B. Call the component by using the TaskFactory.FromAsync() method.
C. Apply the following attribute to the ProcessData() method signature: [Methodlmpl(MethodlmplOptions.Synchronized)]
D. Apply the async modifier to the ProcessData() method signature.
Answer: A,B
Explanation: A: In many scenarios, it is useful to enable a Task<TResult> to represent an external asynchronous operation. TaskCompletionSource<TResult> is provided for this purpose. It enables the creation of a task that can be handed out to consumers, and those consumers can use the members of the task as they would any other. However, unlike most tasks, the state of a task created by a TaskCompletionSource is controlled explicitly by the methods on TaskCompletionSource. This enables the completion of the external asynchronous operation to be propagated to the underlying Task. The separation also ensures that consumers are not able to transition the state without access to the corresponding TaskCompletionSource.
B: TaskFactory.FromAsync Method
Creates a Task that represents a pair of begin and end methods that conform to the
Asynchronous Programming Model pattern. Overloaded.
Example:
TaskFactory.FromAsync Method (IAsyncResult, Action<IAsyncResult>)
Creates a Task that executes an end method action when a specified IAsyncResult completes.
Note:
* System.Threading.Tasks.Task Represents an asynchronous operation.
Q42. - (Topic 2)
You develop an application by using C#. The application counts the number of times a specific word appears within a set of text files. The application includes the following code. (Line numbers are included for reference only.)
You have the following requirements:
. Populate the _wordCounts object with a list of words and the number of occurrences of each word. . Ensure that updates to the ConcurrentDictionary object can happen in parallel.
You need to complete the relevant code.
Which code segment should you insert at line 23?
A. Option A
B. Option B
C. Option C
D. Option D
Answer: A
Q43. - (Topic 1)
You are developing an application by using C#. The application includes the following code segment. (Line numbers are included for reference only.)
The DoWork() method must throw an InvalidCastException exception if the obj object is not of type IDataContainer when accessing the Data property.
You need to meet the requirements. Which code segment should you insert at line 07?
A. var dataContainer = (IDataContainer) obj;
B. var dataContainer = obj as IDataContainer;
C. var dataContainer = obj is IDataContainer;
D. dynamic dataContainer = obj;
Answer: A
Explanation:
http://msdn.microsoft.com/en-us/library/ms173105.aspx
Q44. - (Topic 2)
You are writing the following method (line numbers are included for reference only):
You need to ensure that CreateObject compiles successfully.
What should you do?
A. Insert the following code at line 02: where T : new()
B. Replace line 01 with the following code: public void CreateObject<T>()
C. Replace line 01 with the following code: public Object CreateObject<T>()
D. Insert the following code at line 02: where T : Object
Answer: A
Q45. - (Topic 2)
You have the following code:
You need to retrieve all of the numbers from the items variable that are greater than 80. Which code should you use?
A. Option A
B. Option B
C. Option C
D. Option D
Answer: B
Explanation: Enumerable.Where<TSource> Method (IEnumerable<TSource>,
Func<TSource, Boolean>)
Filters a sequence of values based on a predicate.
Example:
List<string> fruits =
new List<string> { "apple", "passionfruit", "banana", "mango",
"orange", "blueberry", "grape", "strawberry" };
IEnumerable<string> query = fruits.Where(fruit => fruit.Length < 6);
foreach (string fruit in query)
{
Console.WriteLine(fruit);
}
/*
This code produces the following output:
apple
mango
grape */
Q46. - (Topic 1)
You are developing a method named CreateCounters that will create performance counters for an application.
The method includes the following code. (Line numbers are included for reference only.)
You need to ensure that Counter1 is available for use in Windows Performance Monitor (PerfMon).
Which code segment should you insert at line 16?
A. CounterType = PerformanccCounterType.RawBase
B. CounterType = PerformanceCounterType.AverageBase
C. CounterType = PerformanceCounterType.SampleBase
D. CounterType = PerformanceCounterType.CounterMultiBase
Answer: C
Explanation:
PerformanceCounterType.SampleBase - A base counter that stores the number of sampling interrupts taken and is used as a denominator in the sampling fraction. The sampling fraction is the number of samples that were 1 (or true) for a sample interrupt. Check that this value is greater than zero before using it as the denominator in a calculation of SampleFraction.
PerformanceCounterType.SampleFraction - A percentage counter that shows the average ratio of hits to all operations during the last two sample intervals. Formula: ((N 1 - N 0) / (D 1 - D 0)) x 100, where the numerator represents the number of successful operations during the last sample interval, and the denominator represents the change in the number of all operations (of the type measured) completed during the sample interval, using counters of type SampleBase. Counters of this type include Cache\Pin Read Hits %. http://msdn.microsoft.com/en-us/library/system.diagnostics.performancecountertype.aspx
Q47. - (Topic 2)
You are implementing a new method named ProcessData. The ProcessData() method calls a third-party component that performs a long-running operation.
The third-party component uses the IAsyncResult pattern to signal completion of the long-running operation.
You need to ensure that the calling code handles the long-running operation as a System.Threading.Tasks.Task object.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Call the component by using the TaskFactory.FromAsync() method.
B. Create a TaskCompletionSource<T> object.
C. Apply the async modifier to the method signature.
D. Apply the following attribute to the method signature: [MethodImpl(MethodImplOptions.Synchronized)]
Answer: A,B
Explanation: A: TaskFactory.FromAsync Method
Creates a Task that represents a pair of begin and end methods that conform to the
Asynchronous Programming Model pattern. Overloaded.
Example:
TaskFactory.FromAsync Method (IAsyncResult, Action<IAsyncResult>)
Creates a Task that executes an end method action when a specified IAsyncResult
completes.
B: In many scenarios, it is useful to enable a Task<TResult> to represent an external asynchronous operation. TaskCompletionSource<TResult> is provided for this purpose. It enables the creation of a task that can be handed out to consumers, and those consumers can use the members of the task as they would any other. However, unlike most tasks, the state of a task created by a TaskCompletionSource is controlled explicitly by the methods on TaskCompletionSource. This enables the completion of the external asynchronous operation to be propagated to the underlying Task. The separation also ensures that consumers are not able to transition the state without access to the corresponding TaskCompletionSource.
Note:
* System.Threading.Tasks.Task Represents an asynchronous operation.
Q48. - (Topic 1)
You are creating a console application by using C#.
You need to access the assembly found in the file named car.dll.
Which code segment should you use?
A. Assembly.Load();
B. Assembly.GetExecutingAssembly();
C. This.GetType();
D. Assembly.LoadFile("car.dll");
Answer: D
Explanation:
Assembly.LoadFile - Loads the contents of an assembly file on the specified path. http://msdn.microsoft.com/en-us/library/b61s44e8.aspx
Q49. DRAG DROP - (Topic 2)
You write the following code.
You need to get the list of all the types defined in the assembly that is being executed currently.
How should you complete the code? To answer, drag the appropriate code elements to the correct targets in the answer area. Each code element may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
Answer:
Q50. DRAG DROP - (Topic 2)
You are creating a method that will split a single input file into two smaller output files.
The method must perform the following actions:
. Create a file named header.dat that contains the first 20 bytes of the input file.
. Create a file named body.dat that contains the remainder of the input file.
You need to create the method.
How should you complete the relevant code? (To answer, drag the appropriate code segments to the correct locations in the answer area. Each code segment may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.)
Answer: