★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions
Free Instant Download NEW 70-417 Exam Dumps (PDF & VCE):
Available on:
https://www.certleader.com/70-417-dumps.html
Youd better use a test prior to buying our own 70-417 products. This step will make you aware of your weak along with strong elements of the 70-417 exam preparation. Invest more moment on the weak factors. We supply free downloadable Pdf files along with Test Serp software. You can download these on your PC along with make entire preparation for the Microsoft 70-417 genuine exam.
2021 Sep examcollection 70-417:
Q201. You have a server named Server1 that runs Windows Server 2012 R2.
On Server1, you configure a custom Data Collector Set (DCS) named DCS1. DCS1 is configured to store performance log data in C:\Logs.
You need to ensure that the contents of C:\Logs are deleted automatically when the folder reaches 100 MB in size.
What should you configure?
A. A File Server Resource Manager (FSRM) file screen on the C:\Logs folder
B. The Data Manager settings of DCS1
C. A schedule for DCS1
D. A File Server Resource Manager (FSRM) quota on the C:\Logs folder
Answer: B
Q202. Which feature is described below?
You can use the ___ to reduce the number of duplicate blocks of data in storage, you can store much more data in a given amount of storage capacity than was possible in previous releases that used Single Instance
Storage (SIS) or NTFS file system compression.
A. iSCSI Target Server
B. iSCSI Target Boot
C. Multiterabyte Volumes
D. Data Deduplication role service
Answer: D
Explanation:
By using Data Deduplication, general purpose file servers can typically reduce storage capacity utilization by a 2:1 ratio (for example, files that previously used 1 TB would use 500 GB after deduplication). Servers that host virtualization data (such as VHD files) often reduce storage capacity utilization by a 20:1 ratio, which reduces 1 TB of data to 50 GB.
Q203. Dynamic memory is a great feature that allows you to manage the amount of memory that Hyper-V virtual machines consume.
How would you identify the memory a virtual machine consumes when Dynamic Memory is not enabled?
A. View the amount of RAM listed under Startup in the Memory page of the virtual machine
B. View the amount of RAM listed under Static in the Memory page of the virtual machine
C. None of these
D. View the amount of RAM listed under Maximum in the Memory page of the virtual machine
Answer: A
Explanation:
When dynamic memory is not enabled, the virtual machine is given a static amount of
RAM. This value is located under the Startup section of the Memory page of the virtual
machine settings.
Notice in my screenshot it's enabled:
Q204. A user from your organisation has reported to the IT helpdesk that they are receiving the following message:
"Your account is configured to prevent you from using the computer. Please try another computer."
What should you do to enable them to log on to their computer?
A. Use the Dsmove command
B. Click the Log On To button on the Account tab of her user account
C. None of these
D. Click the Allowed To Join Domain button in the New Computer dialog box
Answer: B
Explanation:
The error message is about the user account configuration. This can be set here:
Q205. Your network contains an Active Directory domain named contoso.com. All domain controllers run Windows Server 2012 R2.
An organizational unit (OU) named OU1 contains 200 client computers that run Windows 8 Enterprise. A Group Policy object (GPO) named GPO1 is linked to OU1.
You make a change to GPO1.
You need to force all of the computers in OU1 to refresh their Group Policy settings immediately. The solution must minimize administrative effort.
Which tool should you use?
A. TheSecedit command
B. The Invoke-GpUpdatecmdlet
C. Group Policy Object Editor
D. Server Manager
Answer: B
Regenerate windows 2012 exam 70-417:
Q206. You have a server named Server1 that runs Windows Server 2012 R2.
You need to configure Server1 to create an entry in an event log when the processor usage exceeds 60 percent.
Which type of data collector should you create?
A. A performance counter data collector
B. An event trace data collector
C. A performance counter alert
D. A configuration data collector
Answer: C
Q207. Your network contains an Active Directory domain named adatum.com. The domain contains a member server named Server1 and a domain controller named DC2. All servers run Windows Server 2012 R2.
On DC2, you open Server Manager and you add Server1 as another server to manage.
From Server Manager on DC2, you right-click Server1 as shown in the exhibit. (Click the Exhibit button.)
You need to ensure that when you right-click Server1, you see the option to run the DHCP console.
What should you do?
A. On Server1, install the Feature Administration Tools.
B. On DC2 and Server1, run winrmquickconfig.
C. On DC2, install the Role Administration Tools.
D. In the domain, add DC1 to the DHCP Administrators group.
Answer: C
Explanation:
http://technet.microsoft.com/en-us/library/hh921475.aspx "In Windows Server 2012 R2 Preview and Windows Server 2012 R2, remote management is enabled by default. Before administrators can connect to a computer that is running Windows Server 2012 R2 Preview or Windows Server 2012 R2 remotely by using Server Manager, Server Manager remote management must be enabled on the destination computer if it has been disabled."
Q208. Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named DC1.
You run ntdsutil as shown in the exhibit. (Click the Exhibit button.)
You need to ensure that you can access the contents of the mounted snapshot.
What should you do?
A. From a command prompt, run dsamain.exe -dbpath c:\$snap_201204131056_volumec$\windows\ntds\ntds.dit -Idapport 33389.
B. From the snapshot context of ntdsutil, run mount {79f94f82-5926-4f44-8af0-2f56d827a57d>.
C. From the snapshot context of ntdsutil, run activate instance "NTDS".
D. From a command prompt, run dsamain.exe -dbpath c:\$snap_201204131056_volumec$\windows\ntds\ntds.dit -Idapport 389.
Answer: A
Explanation:
This is a live DC, so 389 is already in use; 33389 would not be so is a valid port. http://technet.microsoft.com/en-us/library/cc753609(v=ws.10).aspx
Q209. Your network contains an Active Directory domain named contoso.com. The domain contains a member server named Server1 that has the Active Directory Federation Services server role installed. All servers run Windows Server 2012.
You complete the Active Directory Federation Services Configuration Wizard on Server1.
You need to ensure that client devices on the internal network can use Workplace Join.
Which two actions should you perform on Server1? (Each correct answer presents part of the solution. Choose two.)
A. Run Enable AdfsDeviceRegistration -PrepareActiveDirectory.
B. Edit the multi-factor authentication global authentication policy settings.
C. Edit the primary authentication global authentication policy settings.
D. Run Set-AdfsProxyPropertiesHttpPort 80.
E. Run Enable-AdfsDeviceRegistration.
Answer: C,E
Explanation:
* To enable Device Registration Service
On your federation server, open a Windows PowerShell command window and type:
Enable-AdfsDeviceRegistration
Repeat this step on each federation farm node in your AD FS farm..
Enable seamless second factor authentication Seamless second factor authentication is an enhancement in AD FS that provides an added level of access protection to corporate resources and applications from external devices that are trying to access them. When a personal device is Workplace Joined, it becomes a ‘known’ device and administrators can use this information to drive conditional access and gate access to resources. To enable seamless second factor authentication, persistent single sign-on (SSO) and conditional access for Workplace Joined devices In the AD FS Management console, navigate to Authentication Policies. Select Edit Global Primary Authentication. Select the check box next to Enable Device Authentication, and then click OK.
Q210. You perform a Server Core Installation of Windows Server 2012 R2 on a server named Server1.
You need to add a graphical user interface (GUI) to Server1.
Which tool should you use?
A. the dism.exe command
B. the ocsetup.exe command
C. the setup.exe command
D. the Install-Module cmdlet
Answer: A
Explanation:
The DISM command is called by the Add-WindowsFeature command. Here is the systax for DISM: Dism /online /enable-feature /featurename:ServerCore-FullServer /featurename:Server-Gui-Shell /featurename:Server-Gui-Mgmt