★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions
Free Instant Download NEW 642-732 Exam Dumps (PDF & VCE):
Available on:
https://www.certleader.com/642-732-dumps.html
Proper study guides for Replace Cisco CCNP Wireless - CUWSS certified begins with Cisco 642-732 preparation products which designed to deliver the Download 642-732 questions by making you pass the 642-732 test at your first time. Try the free 642-732 demo right now.
2021 Oct 642-732 cuwss cbt nuggets:
Q81. After having the kick-off meeting for a new site survey project with your customer, which three factors need to be considered prior to beginning a WLAN site survey? (Choose three.)
A. Will an additional trip to the facility to perform the initial walkthrough be required?
B. How much time should be allocated to survey the locations for the controllers?
C. Will any additional regulatory or safety training be required to complete the site survey?
D. Is access available to all areas of the customer facility where the WLAN is planned to be deployed?
E. Which types of controllers and switches will be required to fully conduct the site survey in all areas of the customer facility?
F. Is access available to customer employees so that initial interviews can be performed?
Answer: A,C,D
Q82. You have been asked to evaluate a deployed version 7.0 controller based WLAN, which includes a Cisco WCS and an MSE3310. Currently, the customer has a approximately 1900 clients and 300 RFID tags. The customer is complaining of problems tracking clients and RFID tags. What can be done to correct this problem?
A. Increase the wIPS license on the MSE3310.
B. Replace the MSE3310 with a MSE3355 and increase the wIPS license.
C. Replace the MSE3310 with a MSE3355 and increase the Context-Aware license.
D. Decrease the wIPS license on the MSE3310.
E. Increase the Context-Aware license on the MSE3310.
Answer: C
Q83. An engineer is deploying centralized wireless solution with a 5508 controller. What is the most AP licenses that can be supported?
A. 50
B. 100
C. 250
D. 500
E. 1000
Answer: D
Q84. When does the curvature of the earth become a factor in an outdoor RF point-to-point link?
A. 4 miles
B. 7 miles
C. 10 miles
D. 12 miles
E. 15 miles
Answer: B
Q85. Refer to the exhibit.
Which type of cable connector is displayed that is used to connect antennas to transmitters?
A. RP-TNC
B. N
C. SMA
D. SMB
E. MMCX
Answer: B
Leading 642-732 braindump:
Q86. What is the basic difference in the manner in which a client location is determined on a map when using Cisco WCS Location v7.0 versus Cisco WCS Base?
A. Cisco WCS Base uses SNR from two or more APs, and Cisco WCS Location uses the SNR from the closest AP.
B. Cisco WCS Base uses highest SNR signal from a single AP, and Cisco WCS Location uses highest SNR signal from two or more APs.
C. Cisco WCS Base uses RSSI from a single AP, and Cisco WCS Location compares the RSSI signal strength from two or more APs.
D. Cisco WCS Base uses RSSI from two or more APs, and Cisco WCS Location uses RSSI from the closest AP.
Answer: C
Q87. Refer to the exhibit. A company requires a multi-point bridge solution with Cisco 1400 series bridges. The central bridge (B1) is set to 10 dBm, the manufacturing remote bridge (B2) is set to 20 dBm, the inventory remote bridge (B3) is set to 20 dBm, and the shop remote bridge (B4) is set to 10 dBm. What is the maximum allowed power setting for all four bridges?
A. B1=12dBm B2=12dBm B3=12dBm B4=12dBm
B. B1=12dBm B2=24dBm B3=24dBm B4=24dBm
C. B1=24dBm B2=12dBm B3=12dBm B4=12dBm
D. B1=24dBm B2=24dBm B3=24dBm B4=24dBm E. B1=20dBm B2=20dBm B3=20dBm B4=20dBm
F. B1=10dBm B2=24dBm B3=24dBm B4=24dBm
Answer: B
Q88. You have a customer that is renovating a historic building for a new headquarters. The building was once an old manufacturing plant. It is constructed of brick with heavy timber
beams. What type of RF issues do you expect to see while performing the site survey?
A. The RF signal will be reflected by the brick walls.
B. The RF signal will be absorbed by the brick walls and wooden beams and floors.
C. The RF signal will be diffused by the brick walls and wooden beams and floors.
D. The brick walls and wooden beams and floors will cause the RF signal to be diffracted.
Answer: B
Q89. An engineer is conducting a failover test with a Mesh deployment by disconnecting the network interface of a RAP. A MAP becomes stranded even though it has an acceptable RSSI value on the link to its neighbor. What are two reasons the MAP may become stranded? (Choose two.)
A. the MAP is 6 hops away
B. the MAP is 9 hops away
C. the SNR on the neighbor link is 5dB
D. the SNR on the neighbor link is 15dB
E. the throughput on the neighbor link is 18Mbps
F. the throughput on the neighbor link is 24Mbps
Answer: B,C
Q90. Refer to the exhibit.
The signal is being degraded to the point of link drops. You have examined the roof and the visual sighting of the remote antenna. What could be causing the issue?
A. The receiving antenna is too close to the transmitting antenna.
B. The first Fresnel zone is more than 60% blocked by the parapet.
C. The visual line of sight is more than 60% blocked by the parapet.
D. The cable between the APs and the antennae is introducing too much loss.
E. The roof material is absorbing too much of the signal.
Answer: B