★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions
Free Instant Download NEW 642-035 Exam Dumps (PDF & VCE):
Available on:
https://www.certleader.com/642-035-dumps.html
All the Cisco 642-035 on the web study materials are of great worth with many supreme accuracy. Our professionals are dedicated to presenting the most authentic, reliable, and current Cisco Cisco certification exam questions for you personally all. Youll get a large mark which in turn guarantee your current success in direction of Cisco certification. You can be at ease with all the answers to the Cisco Cisco 642-035 stimulation tests. The actual Cisco Cisco 642-035 braindumps contain almost 100% correct answers which cause you to be understand the particular 642-035 questions easily. Youll be able to get a passing score from the Cisco Cisco real test. In addition, you can get a total refund because of your current failure from the Cisco exam after utilizing our products. You should send out us your Cisco 642-035 score report. We will return your income within 12 hours.
2021 Oct cisco ccnp data center 642-035 dcuct:
Q41. When a service profile is disassociated from a server, what happens to the identity and connectivity information for the server?
A. It is cleared and set to the default that was setup initially by the first configuration.
B. It is maintained and can be reused.
C. It is reset to factory defaults.
D. It uses master service profile parameters.
E. It takes parameters of other servers in the service profile.
Answer: C
Q42. Refer to the exhibit.
In a Cisco UCS environment, which switch mode does the exhibit portray?
A. end host mode
B. switching mode
C. access mode
D. core mode
Answer: A
Q43. A customer is trying to boot an operating system installed on a Cisco UCS B-Series blade server after a RAID1 cluster migration. The RAID LUN remains in inactive state during and
after the service profile association and the server does not boot. What is the cause of this problem?
A. RAID1 is not supported in cluster migration mode on a Cisco UCS B-Series blade server.
B. The local disk configuration policy in the service profile on the server is configured with Any Configuration mode rather than RAID1.
C. The server needs to be booted via SAN in cluster migration to support RAID1.
D. The Cisco UCS B-Series blade server has older firmware that needs to be updated first.
Answer: B
Q44. Which three methods can be used to upgrade the Cisco IMC? (Choose three.)
A. host firmware package
B. blade firmware package
C. controller firmware package
D. management firmware package
E. directly on the blade, under the Installed Firmware tab
F. directly on the blade, under the Blade Firmware tab
G. directly on the blade, under Inventory > CIMC
Answer: DEG
Q45. Which four tech support files can you create with the Cisco UCS Manager that you can submit to Cisco TAC for support? (Choose four.)
A. UCSM
B. disk LUNs
C. fabric extender
D. memory
E. rack server
F. chassis
G. server cache
Answer: ACEF
Refresh 642-035 exam dumps:
Q46. Which command sequence in the Cisco UCS C-Series rack server CLI sends tech support data to a TFTP server?
A. ucs-c250 / # scope cimc ucs-c250 /cimc # scope tech-support ucs-c250 /cimc/tech-support # set path default.tar.gz ucs-c250 /cimc/tech-support *# set tftp-ip 192.168.70.45 ucs-c250 /cimc/tech-support *# commit
B. ucs-c250 / # scope system ucs-c250 /system # scope tech-support ucs-c250 /system/tech-support # set path default.tar.gz ucs-c250 /system/tech-support *# set tftp-ip 192.168.70.45 ucs-c250 /system/tech-support *# commit
C. ucs-c250 / # scope support ucs-c250 /support # scope tech-support ucs-c250 /support/tech-support # set path default.tar.gz ucs-c250 /support/tech-support *# set tftp-ip 192.168.70.45 ucs-c250 /support/tech-support *# commit
D. ucs-c250 / # scope fault ucs-c250 /fault # scope tech-support ucs-c250 /fault/tech-support # set path default.tar.gz ucs-c250 /fault/tech-support *# set tftp-ip 192.168.70.45 ucs-c250 /fault/tech-support *# commit
Answer: A
Q47. You are troubleshooting an FCoE SAN boot issue on a Cisco UCS C240 M3 server with a VIC 1225. Which two of these represent the correct way to bind VSAN 11 to interface vfc5 attached to interface Ethernet 1/5? (Choose two.)
A. 5548UP(config)# int vfc 5 5548UP(config-if)# bind interface Ethernet1/5 vsan 11
B. 5548UP(config)# vsan database 5548UP(config-vsan-db)# vsan 11 interface vfc5
C. 5548UP(config)# interface Ethernet1/5 5548UP(config-if)# bind vsan 11
D. 5548UP(config)# vsan database 5548UP(config-vsan-db)# bind interface vfc5 vsan 11
E. 5548UP(config)# vsan database 5548UP(config-vsan-db)# interface vfc5 vsan 11
F. 5548UP(config)# vsan database 5548UP(config-vsan-db)# interface Ethernet1/5 vsan 11
Answer: AB
Q48. Which CLI command will indicate whether a Cisco UCS C-Series rack-mount server has any failed DIMMs?
A. ucs-c250 / # scope chassis ucs-c250 /chassis # show dimm-summary
B. ucs-c250 / # scope chassis ucs-c250 /chassis # show dimm-fault C. ucs-c250 / # scope chassis ucs-c250 /chassis # show dimm-ecc
D. ucs-c250 / # scope chassis ucs-c250 /chassis # show dimm-recovery
Answer: A
Q49. When using the Cisco UCS Manager GUI to troubleshoot a suspected bad memory, which
logs contain data that are related to the faulty DIMM?
A. the System Event log and Faults log that are located under the Admin tab
B. the Events log and Faults log that are located under the Admin tab
C. the System Event log that is located under the Server tab in the Navigation panel and the Faults log that is located under the Admin tab
D. the System Event log that is located under the Equipment tab and the Faults log that is located under the Admin tab
Answer: D
Q50. Looking at the Equipment > Chassis > Servers > Server X view from the Cisco UCS Manager GUI, which tab would you select to identify the fabric interconnect uplink associated with a given virtual circuit?
A. Paths
B. vNIC Paths
C. Virtual Circuit Paths
D. VIF Paths
Answer: D