★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions

Free Instant Download NEW 300-075 Exam Dumps (PDF & VCE):
Available on: https://www.certleader.com/300-075-dumps.html


Q101. Refer to the exhibit. 

How does the Cisco Unified Communications Manager advertise dn-block 2? 

A. 14087071222 with number type international 

B. +14087071222 with number type international 

C. +14087071222 

D. 14087071222 

Answer: C 


Q102. How do RSVP-enabled locations differ from Cisco Unified Communications Manager locations? 

A. RSVP is configured in the ISR independent of Cisco Unified Communications Manager. 

B. RSVP enables AAR within Cisco Unified Communications Manager. 

C. RSVP is topology aware. 

D. RSVP is configured in Cisco Unified Communications Manager independent of the ISR. 

Answer: C 


Q103. Which statement best describes globalized call routing in Cisco Unified Communications Manager? 

A. All incoming calling numbers on the phones are displayed as an E.164 with the + prefix. 

B. Call routing is based on numbers represented as an E.164 with the + prefix format. 

C. All called numbers sent out to the PSTN are in E.164 with the + prefix format. 

D. The CSS of all phones contain partitions assigned to route patterns that are in global format. 

E. All phone directory numbers are configured as an E.164 with the + prefix. 

Answer: B 

Explanation: 

Incorrect Answer: A, C, D, E For the destination to be represented in a global form common to all cases, we must adopt a global form of the destination number from which all local forms can be derived. The + sign is the mechanism used by the ITU's E.164 recommendation to represent any PSTN number in a global, unique way. This form is sometimes referred to as a fully qualified PSTN number. Link: http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/7x/dialplan.html#wp1153205 


Q104. Which two statements describe RSVP-enabled locations-based CAC? (Choose two.) 

A. RSVP can be enabled selectively between pairs of locations. 

B. Using RSVP for CAC simply allows admitting or denying calls based on a logical 

configuration that is ignoring the physical topology. 

C. RSVP is topology aware, but only works with full mesh networks. 

D. An RSVP agent is a Media Termination Point that the call has to flow through. 

E. RSVP and RTP are used between the two endpoints. 

Answer: A,D 

Explanation: 

Incorrect Answer: B, C The RSVP policy that is configured for a location pair overrides the default interlocation RSVP policy that configure in the Service Parameter Configuration window. RSVP supports audio, video, and data pass-through. Video data pass-through allows video and data packets to flow through RSVP agent and media termination point devices Link: https://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmsys/a02rsvp.ht ml#wp1070214 


Q105. Which two statements about SAF service identifier numbers are true? (Choose two.) 

A. They are generated in the format service:sub-service:instance.instance.instance.instance. 

B. They are 16-bit decimal identifiers. 

C. They are generated in the format data-source:sub-service:instance.matrix.fifty.saf. 

D. They are 32-bit decimal identifiers. 

E. They are generated in the format data.saf.cucm-publisher.asf@domain.local. 

F. They are generated in the format telco.cisco.saf-forwader.db.replicate.data.local. 

Answer: A,B 


Q106. Which statement is true regarding the configuration of SAF Forwarder? 

A. In a multisite dial plan, SAF Forwarders may exist in multiple autonomous systems. 

B. The client label that is configured in Cisco Unified Communications Manager must match the configuration on the SAF Forwarder router. 

C. There should not be multiple nodes of Cisco Unified Communications Manager clusters acting as SAF clients. 

D. The destination IP address must match the loopback address of the SAF router. 

Answer: A 


Q107. What is the default DSCP/PHB for TelePresence video conferencing packets in Cisco Unified Communications Manager? 

A. EF/46 

B. CS6/48 

C. AF41/34 

D. CS3/24 

E. CS4/32 

Answer: E 


Q108. Refer to the exhibit. 

The HQ site uses area code 650. The BR1 site uses area code 408. The long distance national code for PSTN dialing is 1. To make a long distance national call, an HQ or BR1 user dials access code 9, followed by 1, and then the 10-digit number. Both sites use MGCP gateways. AAR must use globalized call routing using a single route pattern. Assume that all outgoing PSTN numbers are localized at the egress gateway as shown in the exhibit. Which statement is true? 

A. The AAR group system must be configured on the device configuration of the phones. 

B. The AAR group system must be configured on the line configuration of the phones. 

C. The single AAR group system cannot be used. A second AAR group must be configured in order to have source and destination AAR groups. 

D. The AAR group system must be configured under the AAR service parameters. 

Answer: B 


Q109. Refer to the exhibit. 

Assuming the regions configuration to BR only permits G.729 codec, how many calls are allowed for the BR location? 

A. Total of four calls; two incoming and two outgoing. 

B. Total of two calls in either direction. 

C. Total of four calls to the BR location. Outgoing calls are not impacted by the location configuration. 

D. Total of four calls in either direction. 

E. Two outgoing calls. Incoming calls are unlimited. 

Answer: D 

Explanation: 

Incorrect Answer: A, B, C, E In performing location bandwidth calculations for purposes of call admission control, Cisco Unified Communications Manager assumes that each G.729 call stream consumes 24 kb/s amount of bandwidth Link: 

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmsys/a02cac.html #wpxref28640 


Q110. Refer to the following exhibit. 

The MGCP gateway has the following configurations: 

called party transformation CSS HQ_cld_pty CSS (partition=HQ cld_pty.Pt) call.ng party transformation CSS HQ_clng_pty CSS (partition=HQ_clng_pty Pt) 

All translation patterns have the check box "Use Calling Party's External Phone Number Mask" enabled. 

When the IP phone at extension 3001 places a call to 9011 49403021 56001# what is the resulting called and calling number that is sent to the PSTN? 

A. The called number is 01 1 49403021 56001. The calling number will be 5553001 and number type set to subscriber. 

B. The called number is 011 49403021 56001. The calling number will be 5215553001 and number type set to national. 

C. The called number is 4940302156001 with number type set to international. The calling number will be 5215553001 and number type set to national. 

D. The called number is +49403021 56001 with number type set to international. The calling number will be 5215553001 and number type set to subscriber. 

Answer: A 

Explanation: 

Incorrect Answer: B, C, D Check the check box "Use Calling Party's External Phone Number Mask" if you want the full, external phone number to be used for calling line identification (CLID) on outgoing calls. You may also configure an External Phone Number Mask on all phone devices. Link: http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00805 b6f33.shtml