The Secret Of CompTIA 220-1101 Free Practice Questions

NEW QUESTION 1
A technician replaced a motherboard on a server, and now the 64-bit hypervisor is not loading correctly. Which of the following needs to be enabled for the hypervisor to run?

• A. Hardware prefetcher
• B. Hyperthreading
• C. vPro
• D. VT-d

Answer: D

NEW QUESTION 2
An end user reports that the time and date on a desktop resets after shutdown, and subsequently, the device reboots. The next day, the desktop does not load the OS and is stuck at a black screen with the following message:

Which of the following would be the BEST action to take next?

• A. Change the motherboard.
• B. Reseat the motherboard power connections.
• C. Replace the CMOS battery.
• D. Restore the BIOS to factory default settings.

Answer: C

NEW QUESTION 3
A technician goes to a classroom to troubleshoot a projector that occasionally powers off. The technician recreates the issue and notices the projector will not power back on until approximately 15 minutes have passed. After 15 minutes of being powered on. the projector shuts off again. Which of the following should the technician perform NEXT to resolve the issue?

• A. Clean the filter.
• B. Adjust the standby timeout.
• C. Check the power cable connection.
• D. Replace the bulb.

Answer: A

NEW QUESTION 4
A technician is setting up a new desktop computer and will be installing the hard drive directly on the motherboard without using cables to connect it. Which of the following will the technician be installing?

• A. Thunderbolt
• B. eSATA
• C. M.2
• D. SCSI

Answer: A

NEW QUESTION 5
A small ISP has hired a new technician Joe, the new technician, is being trained to configure customers* home networks The trailing instructor gives me technician a starter kit with cables, cable ends, and other network equipment and asks mm to build a working network.
The computer should be connected to have internet connectivity and the phone should be connected to have a dial tone.
INSTRUCTIONS
Use the appropriate cables. cable ends, tools and equipment to configure the network ana connect an components accordingly
There are 3 steps and the simulation starts on step 1.

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 6
A technician installed a Cat 5 UTP cable approximately 275ft (84m) from a network switch in an office to a workstation located on a factory floor The technician sees both a flashing green LED and a flashing orange LED on the workstation's NIC. Which of the following should the technician do FIRST?

• A. Check for loose connections, pinched bends, and physical damage.
• B. Install a powered hub as close as possible to the halfway point in the Cat 5 UTP cable run.
• C. Replace the entire run of Cat 5 UTP cable with Cat 5 STP cable.
• D. Upgrade the entire cable run to multimode fiber.

Answer: A

NEW QUESTION 7
Laura, a customer, has instructed you to configure her home office wireless access point.
She plans to use the wireless network for finances and has requested that the network be setup with the highest encryption possible.
Additionally, Laura knows that her neighbors have wireless networks and wants to ensure that her network is not being interfered with by the other networks.
She requests that the default settings be changed to the following.
Wireless Name: HomeWiFi
Shared Key: CompTIA
Router Password: Secure$1
Finally, Laura wants to ensure that only her laptop and Smartphone can connect to the network.
Laptop: IP Address 192.168.1.100
Hardware Address: 00:0A:BF:03:C4:54
Smartphone: IP Address 192.168.1.101
Hardware Address: 09:2C:D0:22:3F:11
INSTRUCTIONS
Configure Laura's wireless network using the network adapter window.
If at any time you would like to bring back the initial state of the situation, please click the Reset All button.

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 8
A user acquired a new workstation and is attempting to open multiple targe Excel files simultaneously. The user is not experiencing the expected performance when executing such large requests. Which of the following should a technician do FIRST?

• A. Increase the swap partition.
• B. Upgrade the CPU in the workstation.
• C. Upgrade the power supply in the workstation.
• D. Upgrade the RAM in the workstation.

Answer: D

NEW QUESTION 9
A user reports that a PC occasionally falls to boot. The user reboots the PC. but the performance is degrading. The technician hears a strange, repetitive, ticking noise coming from the PC. Which of the following should the technician do FIRST?

• A. Try to extract data.
• B. Reseat the RAM modules.
• C. Inspect the fan.
• D. Check the CD tray.

Answer: C

NEW QUESTION 10
A technician needs to recommend an internet connection for a customer who travels around the world and wants to have connectivity while visiting remote camping locations. Some of the locations the customer visits have limited or unreliable cellular service. Which of the following connection types should the technician recommend?

• A. Satellite
• B. DSL
• C. Fiber
• D. Hotspot

Answer: A

NEW QUESTION 11
A technician is setting up a device to use two-factor authentication. Which of the following meets this requirement?

• A. Thumbprint/retinal scan
• B. Password/password
• C. Password/thumbprint
• D. Password/PIN

Answer: C

NEW QUESTION 12
A Microsoft Windows user is preparing to work in another country and needs to comply with corporate policy for data protection when copying files to portable medi a. Which of the following solutions would MOST likely satisfy this requirement?

• A. A USB 3.1 flash drive with BitLocker to Go installed
• B. An SD memory card with NTFS
• C. An xD memory card with ext3
• D. A portable hard drive with FAT32

Answer: A

NEW QUESTION 13
A technician is commissioning a workstation that is required to have mirrored storage, utilizing two 4TB drives that support one failure. Which of the following BEST meets these requirements?

• A. RAID 0
• B. RAID 1
• C. RAID 5
• D. RAID 10

Answer: B

NEW QUESTION 14
Which of the following describes metered utilization of cloud resources?

• A. Resources provisioned instantly
• B. Payments made only for resources that are used
• C. Resources pooled to increase computing power
• D. Implementation of rapid elasticity

Answer: B

NEW QUESTION 15
Which of the following should the data center hardware technician implement to ensure maximum uptime for customers' virtual machines?

• A. Line conditioner
• B. AC voltage regulator
• C. Uninterruptible power supply
• D. Cloud storage backup

Answer: C

NEW QUESTION 16
......